Your day at the flying field doesn't have to end when the sun goes down. Cut to length and mount these super bright LEDs wherever you want, couple them with an RGB LED controller and program in beautiful moving or static patterns that are sure to dazzle and amaze your flying buddies, but watch out, you might cause several U.F.O. sightings in your area.
See Related controllers on the bottom of this page, these LED strips do require a controller.
These strips contain 60 LEDs per meter and a full length is 5 meters. Others will sell you 30 LEDs per meter or less, we find 60 is great for animations on your planes and projects. We do sell these in 1 meter lengths as the full 5 meter lengths can be expensive and is probably to long for most planes.
Rated for 12V max (2S Lipo)
A single LED failure will not cause the whole strip to go out.
We prefer the 12 volt WS2815 LED strips as the 5 volt versions will have power issues when too many LEDs are powered upo at full brightness at the same time. With the 12 volt strips this issue gone unless you go with an insanely long strip of LEDs.
Each individual LED can have its own color and brightness! You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display.
Designed with one data wire and one backup data wire. If an LED is damaged, the following LEDs can still work! Older designs would stop working at that point of the strip.
Sold by the meter.
Adhesive backed with black background.
NOTE: If buying 5 meters or more, we will ship one full roll per every 5 meters. For lengths shorter than 5 meter we will cut the strip to the correct length.