You have no items in your shopping cart.

Product was successfully added to your shopping cart.
CLM Prebuilt Tailset 3.5

CLM Prebuilt Tailset 3.5


(Out of stock)

CLM Prebuilt Tailset 3.5

Be the first to review this product

Quick Overview

 logo  Light weight, wood and carbon tailsets.




Here we have a prebuilt tailset designed for gliders with wingspans from 3m up to 3.5m. (118" - 138").

The tailset is constructed from laser cut ribs covered with carbon cap strips. The main spar and trailing edge are from pultruded carbon. Additional carbon reinforcements have been added to the mounting areas. The vertical stabilizer has a pre installed kevlar hinge. The tails are covered in light weight Oracover. The tails are designed to mount to CLMs V-mount and tailboom. The elevator slides onto the V-mount and is retained with a screw. The rudder has been made with a carbon tube receiver that slips over the end of the tailboom and is glued into place. The tails can also be adapted to the needs of the creative builder.

This tail group is compatible with CLMs, #131 and #132 fuselage sets.

The Tail Sets we have in stock are covered in Transparent Red Oracover.

 Tail specifications

 Horizontal stabilizer:

  • Span: 660mm , 143mm chord at the middle and 111mm on the tip.
  • Weight: 42g / 1.48oz

Vertical stabilizer:

  • 362mm height. Lower part width is 216mm, and upper part width is 105mm. Bottom part of the tail is located 80mm below the boom. There is enough space inside the vertical stab to install servos.
  • Weight: 55g / 1.94oz


  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register