FrSky GRX6 Vario Rx

Now Exclusive at Aloft Hobbies for the USA. 

As the only FrSky Service Dealer in the USA, we are pleased to keep this fine little ACCST glider receiver in production for you. 

What do you get if you squish an X6R and an HP Vario into a small 3 gram package? You get a G-RX6!

We are grateful to FrSky for entertaining our idea for specialized glider receivers. The G-RX6's design features really help it to stand out from the crowd. The G-RX6 and the G-RX8 are the only receivers that we know of that have built in variometers, satellite / redundancy capability as well as telemetry.

Small in form factor, the G-RX6 can be installed in gliders with restricted payload bays such as DLG's and high performance slopers. Not needing to install an additional altimeter/variometer also saves room and weight. 

The built in barometer provides altitude telemetry and a variometer. The variometer sounds both ascending and descending tones, so you will know whether you are in lift or sink without having to look at your transmitter.

For a little extra confidence you can connect another receiver to the G-RX6. A redundant receiver or satellite, as they are commonly known, helps to improve your aircraft's signal reception under difficult circumstances; such as specking out, all carbon airframes, or flying sites with considerable radio frequency noise. While the satellite receiver can be any of FrSky's SBUS equipped receivers we recommend the XM+. 

G-RX6 receiver incorporates all of the functions of X6R. It features 6 high precision PWM outputs and low latency. The PWM output is 9ms faster than the X6R in high speed mode. The G-RX6 also supports redundancy, this means you can connect another receiver as a backup in the case that the first one fails. If all that isn't enough, the G-RX6 and the whole RX-line have an increased operating range of up to 40% compared to the previous X series receivers.

Features:

• Higher precision PWM and Low latency PWM output
• High Precision Variometer
• Reduced power consumption
• Supports Redundancy Function
• Smart Port and Telemetry enabled 
• Battery voltage detection supported
• IPEX 4 Antenna Connections
• PCB protected with Conformal Coat 

Specifications: