{"title":"New Products","description":"","products":[{"product_id":"spada","title":"Spada GoFast Racer by Aeroic","description":"\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/IMG-2131.avif?v=1761690724\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDesigned by Dr James Hammond at Aeroic, James shares the following:\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eI designed the Spada 118 model to be a faster, more aerodynamically advanced improvement on the Redshift 118. After much contemplation and discussion, and by utilising valuable feedback from the top pilots who flew the original aircraft, the Spada was created. Superior in every aspect, this is a slimmer, lighter, stronger, and more robust bottom-loading version of the initial model. \u003c\/p\u003e\n\u003cp\u003eWith numerous enhancements to the original design specifications, including tougher layups and a standard double sine wave spar, the new super-light Aeroic carbon tissue-skinned tailplanes render the model robust and capable of enduring the rigours of F3f racing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/IMG-4615.avif?v=1761690544\"\u003e\u003c\/p\u003e\n\u003cp\u003eWith its meticulously calculated Optimum Lift Distribution (ODR) crescent wing planform, low drag\/high response aerofoil configuration, and high aspect ratio wings (19:1), the Spada is swift, nimble, easy to fly, exhibits no bad habits, demonstrates excellent stability with flaps, and is simple to land.\u003c\/p\u003e\n\u003cp\u003eTest flying was conducted in the USA by Aeroic Test Pilot Red Jensen, and the model fulfils its ‘GoFast’ designation. It is faster overall, accelerates instantly, turns more tightly, and has greater energy retention potential than any model I have ever designed. In short, it is a pure-bred racing plane that is fully capable of F3f competition use, yet at an affordable price.\u003c\/p\u003e\n\u003cp\u003eAvailable in the following options: Spada – Glider version or E-Spada featuring a different German-designed E-Fuselage. Spinner size: 36mm            \u003c\/p\u003e\n\u003cp\u003eLayup Choices: “L” Light, “S” (Slope), and “SS” (Super Strong) \u003c\/p\u003e\n\u003cp\u003eConstruction: GFK\/CFK Hybrid (Aeroic)\u003cbr\u003eWings: Carbon with Aeroic Sine Wave Spar - SS version has a double carbon\/double ASWS \u003cbr\u003eFuse: Strong Carbon\/Kevlar Reinforced Glass (2.4GHz friendly)\u003cbr\u003eTailplanes – carbon tissue skinned.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe wings on all of Aeroic's models are the result of decades of model design and refinement, There is no other models with this planform or airfoils. And this refinement really shows in the performance.\u003cbr\u003e\u003cbr\u003eThe \"sinusoidal\" wave spar creates a very strong and torsional wing:\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/3sinusoidalwavesparcropped_1024x1024.jpg?v=1667342365\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e Controls:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAilerons\u003c\/li\u003e\n\u003cli\u003eFlaps\u003c\/li\u003e\n\u003cli\u003eElevator\u003c\/li\u003e\n\u003cli\u003eRudder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSpecs:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWingspan: 3.0M (118”)\u003c\/li\u003e\n\u003cli\u003eLength: 1.495M (58.8”)\u003c\/li\u003e\n\u003cli\u003eWing area: 42.98Dm\/2 (666.19”)\u003c\/li\u003e\n\u003cli\u003eTail area: 5.8Dm\/2 (99.9”)\u003c\/li\u003e\n\u003cli\u003eTotal area: 53.8 Dm\/2 (833.9”)\u003c\/li\u003e\n\u003cli\u003eWing Loading at 4Kg (8,8 lb) AUW: 74.39g\/Dm\/2\u003c\/li\u003e\n\u003cli\u003eAspect ratio: 19:1 \u003c\/li\u003e\n\u003cli\u003eWing aerofoils: JH3580, JH3575, JH3570\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/IMG-4599.avif?v=1761690548\"\u003e\u003c\/p\u003e\n\u003cp\u003eAccessories included:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlass servo covers (wing)\u003c\/li\u003e\n\u003cli\u003eV-Tail control arm cover (fuselage)\u003c\/li\u003e\n\u003cli\u003eSmall parts, clevises included\u003c\/li\u003e\n\u003cli\u003ePre-assembled wiring harness\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eServo recommendations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElevator: KST X08H\u003c\/li\u003e\n\u003cli\u003eRudder: KST X08H\u003c\/li\u003e\n\u003cli\u003eAileron: 2x KST HS08\u003c\/li\u003e\n\u003cli\u003eFlaps: 2x KST HS08\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eControl Setup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eV-Elevator: 10 mm up\/down\u003c\/li\u003e\n\u003cli\u003eV-Rudder: 12 mm left\/right\u003c\/li\u003e\n\u003cli\u003eAileron: 10 mm up, 8 mm down\u003c\/li\u003e\n\u003cli\u003eFlaps Landing: 85 degrees down\u003c\/li\u003e\n\u003cli\u003eFlaps Mix: 5 mm up, 5 mm down\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eButterfly\/Landing Flaps: full down, Ailerons 16 mm up (Optional)\u003cbr\u003e6mm elevator compensation at full flaps down position\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed more info, check our Spada thread! \u003ca href=\"https:\/\/forum.alofthobbies.com\/index.php?threads\/spada-gofast-3m.3734\/\" rel=\"noopener\" target=\"_blank\"\u003eclick here.\u003c\/a\u003e\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Electric \/ Slope - Red\/White\/Blue","offer_id":44820712882313,"sku":null,"price":1400.0,"currency_code":"USD","in_stock":false},{"title":"Glider \/ Slope - Red\/White\/Blue","offer_id":44820712915081,"sku":null,"price":1400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/404970917-2419549311549505-8912385426731718962-n.avif?v=1761690516"},{"product_id":"dys-d2225-19-1350kv","title":"DYS D2225-19 1350kv","description":"\u003cp\u003eThese little motors feature a diameter of a mere 22mm and a weight of just 31 grams, making them excellent for skinny aircraft noses of both smaller and up to 2 meter lightweight gliders (RES) or wherever else you need an ultra small, lightweight power plant.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 31g\u003c\/li\u003e\n\u003cli\u003eDimensions: 22 x 25mm\u003c\/li\u003e\n\u003cli\u003eKV: 1350\u003c\/li\u003e\n\u003cli\u003eMax Power: 80W\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: 3.17mm\u003c\/li\u003e\n\u003cli\u003eProp Size:\u003cbr\u003e2s: 9x6: (10A, 17.2 oz thrust ) or 10x5: (12A, 10 seconds max, will overheat!)\u003cbr\u003e3s: 7x4 (8A, 18.2 oz thrust) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":44824640979081,"sku":"D2225-19-1350kv","price":14.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/dys-d2225-19-1350-rpm-v-32g-outrunner.jpg?v=1773769488"},{"product_id":"rotary-tool-bit-set","title":"Rotary File Bit Set","description":"\u003cp\u003eA set of 30 good quality bits of various shapes and sizes for your Dremel or other branded high speed rotary tool. Excellent for working on composite airframes or anywhere else you need to grind away material with precision.\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":44829813637257,"sku":"013-07101","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_85.jpg?v=1762205749"},{"product_id":"rotary-cutting-disk","title":"Rotary Cutting Disk","description":"\u003cp\u003eA 30mm diamond cutting disc and a shaft to mount it on so you can cut just about anything with your high speed rotary tool.\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":44847102427273,"sku":"013-07002","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_86.jpg?v=1762207300"},{"product_id":"8-pin-wing-connector","title":"8 Pin Wing Connector MPX","description":"\u003cp\u003eMultiplex style wing connector with 8 pins.\u003c\/p\u003e\n\u003cp\u003eSold as a single pair of connectors (male \u0026amp; female)\u003c\/p\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":44847289860233,"sku":"8pinMPXplug","price":1.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_87.jpg?v=1762377513"},{"product_id":"repus-2-meter-f3l-f5l","title":"REpuS 2 Meter F3L\/F5L","description":"\u003cp\u003eWant to fly RES (F3L, F5L) with ailerons? This is your solution! Maybe you want a beautiful designs that will catch other pilots eyes as well as it catches thermals. She is a very advanced aerodynamic flying wing that performs! Be sure to check the videos below to get an idea of her performance.\u003c\/p\u003e\n\u003cp\u003eGlider Fuselage:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/REpuS1_1.jpg?v=1762889613\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eElectric Fuselage:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/REpuSE2.jpg?v=1762889707\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2 meter wingspan and super low wing loading combined with an RTF weight under 20 oz makes catching even the weakest lift possible. When you're done specking out in that big boomer thermal, use the spoilers to bring her in. The two piece wing makes transport easy while powered and unpowered fuselage options allow for slope, hand launch, Hi start or flatland flying. Features an all CNC cut wood and carbon spar construction and quality, easy to follow build plans.\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3L (RES) =\u0026gt; High start\u003c\/li\u003e\n\u003cli\u003eF5L (E-RES) =\u0026gt; Electric motor\u003c\/li\u003e\n\u003cli\u003eWingspan: approx. 2m\u003c\/li\u003e\n\u003cli\u003eWing Area: 43.6 dm²\u003c\/li\u003e\n\u003cli\u003eWing Loading: 10 g\/dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 440-500g\u003c\/li\u003e\n\u003cli\u003eControls: Elevons, Spoilers (Motor if electric)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/DSC_7436.jpg?v=1762890216\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe spoilers are very easy to control as there is no load change.\u003c\/li\u003e\n\u003cli\u003eThe receiver is housed in the wing =\u0026gt; this means that one receiver can be used to operate both glider and electric power systems.\u003c\/li\u003e\n\u003cli\u003eDue to its wing-divisible design, the REPUS is very easy to transport.\u003c\/li\u003e\n\u003cli\u003eThe REpuS complies with the competition regulations of the FAI classes F3L (formerly RES) and F5L (formerly E-RES)\u003c\/li\u003e\n\u003cli\u003eA ballast chamber at the center of gravity makes REPUS usable even in freshening winds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eIntended use:\u003c\/p\u003e\n\u003cp\u003eThermal soaring galore!  Whether you launch it by hand (which works much better with the fuselage club) or with the high-start rubber band or a 22mm outrunner motor. \u003c\/p\u003e\n\u003cp\u003e=\u0026gt; With the REPUS, many things are possible!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHave a look at these flight videos that show the true performance of this highly engineered design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHand Launch: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"1250\" height=\"703\" src=\"https:\/\/www.youtube.com\/embed\/ggJEn0zjKDM\" title=\"RC Nurflügel REpuS 19032023\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSloping in VERY light lift:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"1250\" height=\"703\" src=\"https:\/\/www.youtube.com\/embed\/YFXHibVhJdY\" title=\"RC Nurflügel repus022023 2\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn the Hi Start:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"1250\" height=\"703\" src=\"https:\/\/www.youtube.com\/embed\/NfFGJONdBww\" title=\"RC Nurflügel REpuS No 2 erster Hochstart16042023\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAssembly Notes can be found \u003ca rel=\"noopener\" href=\"https:\/\/docs.google.com\/document\/d\/1vNIXiOaZKxgahXULLO1ldVobbWGortFT\/edit?usp=sharing\u0026amp;ouid=113908553369518790655\u0026amp;rtpof=true\u0026amp;sd=true\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Detailed build thread in german can be found \u003ca href=\"https:\/\/www.rc-network.de\/threads\/repus.11943372\/\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA competitive design!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCOMPETITIVE SUCCESS for the REPUS!\u003cbr\u003eFranz Heindler and his REPUS secured 3rd place in the F3L-RES competition at the 2023 Upper Austrian State Championships.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eF5L competition in Lockenhaus on May 31, 2025: 27 participants, sunny weather, light winds, mostly thermals. REpuS takes 2nd place.\u003c\/li\u003e\n\u003cli\u003eJune 2025 - Lockenhaus, Marco Bierbauer took first place with \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e21 participants \u003c\/span\u003eat the F5L competition in Fürstenfeld with his REpuS. Congratulations!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/1749919818569.jpg?v=1762888841\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarco Bierbauer with REpuS is back in the FlyOff! On June 15, 2025, the F5L competition took place in Feldbach (Kornberg Cup + Styrian Championships). He finished 5th in the Cup competition and 2nd in the Styrian Championships.\u003c\/li\u003e\n\u003cli\u003eMarco Bierbauer and his REpuS glider have achieved further success in Triestingtal: In strong winds, he landed five 1000-meter flights in the preliminary round and finished 2nd after the fly-off, out of a total of 16 participants, all of whom were F5L specialists. Congratulations!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor electric the suggested power system is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor: 22mm outside diameter, 30 grams or less, DYS D2225-19 1350kv, DYS D2225-13 2000kv, or Dualsky 221EG, or Dualsky 2225EG\u003c\/li\u003e\n\u003cli\u003eESC: ESCape32 Mini 2 25A, or Hobbywing Mini 30. \u003c\/li\u003e\n\u003cli\u003eProp: Maximum of 8\" diameter.\u003c\/li\u003e\n\u003cli\u003eBattery: Tattu R-Line 3S 550mAh 95C XT30 or Tattu Long 3S 450mAh 75C XT30\u003c\/li\u003e\n\u003cli\u003eSpinner: 32mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/DSC_7593.jpg?v=1762890249\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhat's included with Electric or Glider kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Size Plans\u003c\/li\u003e\n\u003cli\u003ePrecision-cut, CNC-milled components made of balsa and plywood for wings\/tail assembly, trailing edges\u003c\/li\u003e\n\u003cli\u003eFuselage (electric or glider)\u003c\/li\u003e\n\u003cli\u003eAll semi-finished products made of carbon fiber (spars, leading edge, control horns, etc.)\u003c\/li\u003e\n\u003cli\u003e3D printed cutting jig\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/REPUS_bauen_bow-wings_pro_03.jpg?v=1762890404\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eOther suggested items:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 KST A08H servos\u003c\/li\u003e\n\u003cli\u003e2 spoiler servos (e.g., EMAX ES9052MD)\u003c\/li\u003e\n\u003cli\u003e2 MPX original gold-plated high-current sockets (6-pin, green)\u003c\/li\u003e\n\u003cli\u003e2 MPX original gold-plated high-current plugs (6-pin, green)\u003c\/li\u003e\n\u003cli\u003e1.0mm or 1.2mm steel wire for linkages\u003c\/li\u003e\n\u003cli\u003eGP 400mAh\/4.8V 2x2 universal batteries\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMedium\/thin cyanoacrylate adhesive with \u003cmeta charset=\"utf-8\"\u003edispensing tips\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCovering film (OraLight)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRC system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BOW-Wings","offers":[{"title":"Glider","offer_id":44917695676553,"sku":null,"price":288.0,"currency_code":"USD","in_stock":true},{"title":"Electric","offer_id":44917695709321,"sku":null,"price":288.0,"currency_code":"USD","in_stock":true},{"title":"Glider (fuselage only)","offer_id":44917701181577,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true},{"title":"electric (fuselage only)","offer_id":44917701214345,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/Repus5.jpg?v=1762988209"},{"product_id":"mini-pusher-folding-propeller-yoke","title":"Mini Pusher Folding Propeller Yoke 25mm","description":"\u003cp\u003eOur in-house manufactured folding propeller yoke mounts to any race quad motor with a 5mm threaded shaft for low power pusher prop applications (Under 200W). We have not tested the blades upper RPM limits, the small hubs on the blades will be the weak spot. \u003c\/p\u003e\n\u003cp\u003eGreat for flying wings and other small pusher designs. Cleaned up aerodynamics when the motor is off, and far less busted props when landing!\u003c\/p\u003e\n\u003cp\u003eHere it is on a small flying wing: (Note the small dental rubber band that ensures a streamlined closure.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/folded_-_1.jpg?v=1762898829\"\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer a few sizes of propeller blades what will fit: 4.5x3, 5.1x3.1, 5.5x3.3 Equipped with integral forward and rear blade stops so they won't cross over themselves or come forwards and eat your trailing edge. Can be equipped with a rubber band for assisted folding, offering super low drag.\u003c\/p\u003e\n\u003cp\u003eHere it is on our Carbon Falcon kit:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/mini_pusher_prop_-_3.jpg?v=1762909506\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/mini_pusher_prop_-_2.jpg?v=1762909530\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/mini_pusher_prop_-_1.jpg?v=1762909535\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlade Retaining Pin Spacing: 21mm\u003c\/li\u003e\n\u003cli\u003eBlade Retaining Pin Diameter: 1.5mm\u003c\/li\u003e\n\u003cli\u003eYoke Length: 25mm\u003c\/li\u003e\n\u003cli\u003eYoke Width: 4mm\u003c\/li\u003e\n\u003cli\u003eYoke Thickness: 7mm\u003c\/li\u003e\n\u003cli\u003eBlades not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou will need to turn on the \"brake\" setting in your ESC to stop the blade from spinning and allow it to fold. \u003c\/p\u003e\n\u003cp\u003eHot trick - If you can place the motor and prop further away from the wings trailing edge, the prop will be much quieter. If you want to make a bunch of noise, then cut out the trailing edge like the photo above. \u003c\/p\u003e\n\u003cp\u003eNOTE: If blades do not swing freely in yoke, lightly sanding the blade roots to remove slight molding line.\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":44916064256137,"sku":null,"price":3.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_88.jpg?v=1762888400"},{"product_id":"frsky-act-s5412h-servo-30kgf-416-6oz-in-0-05sec-60","title":"FrSky ACT S5412H Servo \/ 30kgf (416.6oz-in) \/ 0.05sec\/60°","description":"\u003cp\u003eThe FrSky ACT series coreless servos utilize a fully CNC machined aluminum case and metal gears. These high-voltage servos are capable of supporting up to 8.4V and offer both high speed and torque performance.\u003c\/p\u003e\n\u003cp\u003eUnlike other FrSky servos, the ACT line offers no telemetry. This is a \"normal\" servo. Like all almost all servos on the market, this \"Standard Size\" servo is happy to connect to just about any receiver regardless of brand.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh durability with metal gear and all-aluminum CNC machined protective case\u003c\/li\u003e\n\u003cli\u003e8.4V high voltage capable operation with high speed and big torque performance\u003c\/li\u003e\n\u003cli\u003eBuilt-in dual precision balls bearing with potentiometer sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/S5412.png?v=1763585205\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":44940353372297,"sku":"03050657","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/4-4_355de8ea-c774-461e-ad62-e547efe6cc58.jpg?v=1773769402"},{"product_id":"frsky-act-s5415h-servo-71kgf-986oz-in-0-10sec-60","title":"FrSky ACT S5415H Servo \/ 71kgf (986oz-in) \/ 0.10sec\/60°","description":"\u003cp\u003eThe FrSky ACT series coreless servos utilize a fully CNC machined aluminum case and metal gears. These high-voltage servos are capable of supporting up to 8.4V and offer both high speed and torque performance.\u003c\/p\u003e\n\u003cp\u003eUnlike other FrSky servos, the ACT line offers no telemetry. This is a \"normal\" servo. Like all almost all servos on the market, this high torque \"Standard Size\" servo is happy to connect to just about any receiver regardless of brand.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh durability with metal gear and all-aluminum CNC machined protective case\u003c\/li\u003e\n\u003cli\u003e8.4V high voltage capable operation with high speed and big torque performance\u003c\/li\u003e\n\u003cli\u003eBuilt-in dual precision balls bearing with potentiometer sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/ACT_5400_series.png?v=1763586413\" alt=\"\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":44940378964105,"sku":"03050658","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/4-4_355de8ea-c774-461e-ad62-e547efe6cc58.jpg?v=1773769402"},{"product_id":"sequre-120-amp-esc-2-8s-escape32-copy","title":"Sequre 200A PRO ESC 5-14S (ESCape32)","description":"\u003cp\u003eThis is the result of an amazing firmware combined with the most bang for your buck  performance ESC we've ever used. From the moment we powered one of these on, we were impressed by the smooth motor operation, ease of programming and vast amount of features.\u003c\/p\u003e\n\u003cp\u003eThe Sequre 200 Amp Pro ESC is able to run in high power setups with its hefty 200A constant and 350A short burst rating. A plug in 5v fan assists with cooling through the all metal casing and a strong, 15A adjustable (via Dip Switches) BEC lets you provide your servos with the power they need while powerful ESCape32 firmware allows for easy tuning on your smartphone or any other Wi-fi capable device via wi-fi adapter (Sold separately),\u003cspan\u003e smooth and efficient motor drive, snappy throttle response and rapid stutter free motor reversal, custom startup tones and much more. It can even be programmed to run Brushed motors if desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(NOTE: These ESCs come programmed for crawlers and are not optimized for proper aircraft use out of the packaging. If you would like us to set one up for you, let us know in your order.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThat's not all, these ESCS offer telemetry, negating the need for several otherwise bulky sensors and are able to communicate via S.port (FrSky), KISS (KISS FC) and CRSF (TBS Crossfire). Connect the single green telemetry wire to your receiver\/Flight controller's Telemetry port and you'll get the following telemetry, all built into the ESC!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal Battery Voltage\u003c\/li\u003e\n\u003cli\u003eConsumed mAh\u003c\/li\u003e\n\u003cli\u003eRPM\u003c\/li\u003e\n\u003cli\u003eAmps\u003c\/li\u003e\n\u003cli\u003eESC Temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32-bit high performance processor STM32G071 @ up to 64MHz and 128KHz motor PWM frequency\u003c\/li\u003e\n\u003cli\u003e8 Layer PCB, 3OZ immersion gold process\u003c\/li\u003e\n\u003cli\u003eHigh Power MOS combined with metal heatsink for good cooling efficiency.\u003c\/li\u003e\n\u003cli\u003e5V 0.5A attachable fan for cooling\u003c\/li\u003e\n\u003cli\u003eTemperature\/voltage\/current\/stall protection\u003c\/li\u003e\n\u003cli\u003eDSHOT 300\/600\/1200, bidirectional DSHOT\u003c\/li\u003e\n\u003cli\u003eSupports uni and bidirectional running (Air\/Ground)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSine startup mode, brushed mode, hybrid mode (for cars) (sensored\/sensorless)\u003c\/li\u003e\n\u003cli\u003eServo PWM, Oneshot125, automatic throttle calibration\u003c\/li\u003e\n\u003cli\u003eAnalog\/serial\/iBUS\/SBUS\/SBUS2\/CRSF input mode\u003c\/li\u003e\n\u003cli\u003eVariable PWM frequency, active freewheeling\u003c\/li\u003e\n\u003cli\u003eBEC supports adjustable outputs of 6V\/7.4V\/8.4V\/12V, 15A\/35A Max\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eKISS\/iBUS\/S.Port\/CRSF telemetry in the form of: Total Battery Voltage, Consumed mAh, RPM, Amps and ESC Temperature\u003c\/li\u003e\n\u003cli\u003eCustomizable startup music\/sounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eBasic dimensions less wire 96mm x 46mm x 38mm and about 293 grams.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/sequre200A_pro2.png?v=1764957703\" alt=\"\" width=\"439\" height=\"212\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/sequre200A_Pro1.png?v=1764957703\" alt=\"\" width=\"444\" height=\"370\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/sequre200A_pro3.png?v=1764957703\" alt=\"\" width=\"442\" height=\"305\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":44945133011081,"sku":"DT14200PROE032","price":130.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/sequre200apro5.png?v=1764958062"},{"product_id":"aeronaut-20mm-x-1-6mm-axle-foam-wheels","title":"Aeronaut 20mm x 1.6mm Axle Lightweight Wheels","description":"\u003cp\u003eA soft, light weight foam wheel for park flyers.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20mm Diameter\u003c\/li\u003e\n\u003cli\u003e5mm Width\u003c\/li\u003e\n\u003cli\u003e1.6mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold In Pairs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45021940285577,"sku":"735319","price":6.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/AN20mm.jpg?v=1767995385"},{"product_id":"aeronaut-45mm-x-2-6mm-axle-foam-wheels","title":"Aeronaut 45mm x 2.6mm Axle Lightweight Wheels","description":"\u003cp\u003eA soft, light weight foam wheel for park flyers.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e45mm Diameter\u003c\/li\u003e\n\u003cli\u003e19mm Width\u003c\/li\u003e\n\u003cli\u003e2.6mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold In Pairs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45021941072009,"sku":"735328","price":8.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/AN45mm.jpg?v=1767995499"},{"product_id":"aeronaut-80mm-x-4-1mm-axle-foam-wheels","title":"Aeronaut 80mm x 4.1mm Axle Lightweight Wheels","description":"\u003cp\u003eA soft, light weight foam wheel for park flyers.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80mm Diameter\u003c\/li\u003e\n\u003cli\u003e24mm Width\u003c\/li\u003e\n\u003cli\u003e4.1mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold In Pairs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45036411256969,"sku":"735338","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/AN80mm.jpg?v=1767996511"},{"product_id":"aeronaut-110mm-x-4-1mm-axle-foam-wheels","title":"Aeronaut 110mm x 4.1mm Axle Lightweight Wheels","description":"\u003cp\u003eA soft, light weight foam wheel for park flyers.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Diameter\u003c\/li\u003e\n\u003cli\u003e30mm Width\u003c\/li\u003e\n\u003cli\u003e4.1mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold In Pairs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45041839898761,"sku":"735341","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/AN110mm.jpg?v=1767996623"},{"product_id":"aeronaut-25mm-x-2mm-axle-foam-rubber-wheels","title":"Aeronaut 25mm x 2mm Axle Foam Rubber Wheels","description":"\u003cp\u003eA Foam Rubber wheel for various aircraft.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25mm Diameter\u003c\/li\u003e\n\u003cli\u003e19mm Width\u003c\/li\u003e\n\u003cli\u003e2mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold Individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45041857822857,"sku":"735241","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/ANBW25mm.jpg?v=1767997071"},{"product_id":"aeronaut-89mm-x-4mm-axle-foam-rubber-wheels","title":"Aeronaut 89mm x 4mm Axle Foam Rubber Wheels","description":"\u003cp\u003eA Foam Rubber wheel for various aircraft.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e89mm Diameter\u003c\/li\u003e\n\u003cli\u003e32mm Width\u003c\/li\u003e\n\u003cli\u003e4mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold Individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45042002428041,"sku":"735251","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/ANBW89mm.jpg?v=1767997908"},{"product_id":"aeronaut-fabric-hinge-tape","title":"Aeronaut Fabric Hinge Tape","description":"\u003cp\u003eQuality fabric reinforced Hinge Tape for well, hinging your control surfaces. Sticks to a variety of materials for a tear resistant, free moving and play free joint.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes in Two 30\" x 4\" strips.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45042008883337,"sku":"749523","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/749523-Gewebe-Scharnierband-IMG_4137_800x800_3cced3c2-fd41-4446-bad1-b8172a14074c.jpg?v=1766087672"},{"product_id":"aeronaut-linkage-lock-0-8-1mm","title":"Aeronaut Linkage Lock 0.8-1mm","description":"\u003cp\u003eSnap on pushrod keepers for your linkages. Put a simple L bend in the end of your music wire pushrod and snap one of these on to lock it onto your control\/servo horn.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 0.8mm - 1mm wire\u003c\/li\u003e\n\u003cli\u003eSold in pack of 10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45046156722313,"sku":"748917","price":5.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_93.jpg?v=1767120499"},{"product_id":"aeronaut-linkage-lock-1-1-2mm","title":"Aeronaut Linkage Lock 1-1.2mm","description":"\u003cp\u003eSnap on pushrod keepers for your linkages. Put a simple L bend in the end of your music wire pushrod and snap one of these on to lock it onto your control\/servo horn.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1mm - 1.2mm wire\u003c\/li\u003e\n\u003cli\u003eSold in pack of 10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45049038667913,"sku":"748918","price":5.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_93.jpg?v=1767120499"},{"product_id":"aeronaut-linkage-lock-1-5mm","title":"Aeronaut Linkage Lock 1.5mm","description":"\u003cp\u003eSnap on pushrod keepers for your linkages. Put a simple L bend in the end of your music wire pushrod and snap one of these on to lock it onto your control\/servo horn.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1.5mm music wire\u003c\/li\u003e\n\u003cli\u003eSold in pack of 10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45049040633993,"sku":"748907","price":5.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_93.jpg?v=1767120499"},{"product_id":"aeronaut-linkage-lock-1-8-2mm","title":"Aeronaut Linkage Lock 1.8-2mm","description":"\u003cp\u003eSnap on pushrod keepers for your linkages. Put a simple L bend in the end of your music wire pushrod and snap one of these on to lock it onto your control\/servo horn.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1.8 - 2mm music wire\u003c\/li\u003e\n\u003cli\u003eSold in pack of 10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45049060130953,"sku":"748919","price":5.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_93.jpg?v=1767120499"},{"product_id":"aeronaut-threaded-pushrod-m2-x-200mm","title":"Aeronaut Threaded Pushrod M2 x 200mm","description":"\u003cp\u003eFabricate pushrods from this quality steel pushrod stock. One end is threaded to fit a 2mm clevis. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20mm Threaded Section\u003c\/li\u003e\n\u003cli\u003eSold in pack of 10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45049069273225,"sku":"748804","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_90.jpg?v=1766438147"},{"product_id":"aeronaut-spoiler-set-180mm","title":"Aeronaut Spoiler Set 180mm","description":"\u003cp\u003eGet down fast with these mechanical spoilers. Install in just about any R\/C glider up to 3m span. You'll need at least 25mm of room inside your wing for movement of the linkage for Extension of up to 22mm above your wing surface for maximum lift dumping action.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures 180mm 9mm x 10mm \u003c\/li\u003e\n\u003cli\u003eSold in a pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45049207586953,"sku":"732941","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/image0_89.jpg?v=1766436424"},{"product_id":"aeronaut-ca-hinges","title":"Aeronaut CA Hinges","description":"\u003cp\u003eA fiber reinforced, non woven hinge for your wood (or foam) control surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in a set of 20\u003c\/li\u003e\n\u003cli\u003eDimensions: 20mm x 0.3mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45049621381257,"sku":"749520","price":8.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/749520-Fliessscharnier-IMG_7465_800x800_fb6db3cd-e9ec-43bf-8c79-e965d3c96fcd.jpg?v=1766085969"},{"product_id":"aloft-soldering-vice","title":"Aloft 3 in 1 Hobby Vice","description":"\u003cp\u003eIf you are like us, you have tried a number of hobby vices, and many simply don't work well. Same goes for many \"helping hands\" setups for soldering. Enter the 3 in 1 hobby vice. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/Screenshot_2025-12-17_at_2.08.39_PM.png?v=1766009357\" alt=\"\" width=\"382\" height=\"269\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eWe originally built this vice for use in our electronics work area, soon visitors were asking if they could get one after they spotted it on the bench. We joined a vice, a helping hand and a fume extractor into a single unit. \u003c\/p\u003e\n\u003cp\u003eWe start off with a simple but functional vice with replaceable jaw inserts. Great for holding small items, connectors or securing stocks, etc. We then equipped it with an alligator clip on a \u003cmeta charset=\"utf-8\"\u003eflexible segmented arm that stays where you need it, great for holding wire exactly where it needs to be.  We then added a USB powered fan for moving fumes away from your face while soldering. \u003c\/p\u003e\n\u003cp\u003eSimply snap the arms onto the mounts on the vice, making sure the pin lines up, and you're ready to go! Arms can be removed if needed. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45062988824713,"sku":"Vice","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/Vice1_6c92ab8f-e837-4f2e-bf79-4be7bd9b450f.jpg?v=1766001248"},{"product_id":"aeronaut-spike","title":"Aeronaut Spike 3.45m","description":"\u003cp\u003eLooking for an RC model that not only impresses with its flight performance but also offers a unique building experience and individual customization options? Then the Spike wood glider kit is the model for you! This sporty powered glider features an impressive 3.45m wingspan and masters both fast-paced aerobatic maneuvers and relaxed thermal flights with ease with its enormous performance range.\u003c\/p\u003e\n\u003cp\u003eThis kit consists of precisely laser-cut parts, clever templates and the 3D building instructions guide you step by step making for easy assembly. Choose between classic round or the extravagant octagonal fuselage shape to give the model a distinctive look and thanks to the included building jig, the wing is built safely and without distortion in the proven Aero-Naut manner. Speaking of the wing, it is equipped with six large control flaps (ailerons, flaps) which allow for adjustment to various flight conditions and serve as highly effective airbrakes (90° deflection) for precise landings.\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWingspan: Approx. 3,450 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuselage Length: Approx. 1,360 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlying Weight: From 2,700 g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Area: Approx. 64 dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Loading: From approx. 42 g\/dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAirfoil: RG15 mod.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRC functions: Elevator, Rudder, Motor, Ailerons, Flaps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBattery: 4S 3200-4000mAh\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor: Emax GT2826 860kv\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProp: 12x8\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpinner: Turbo 50mm with Turbo 5mm collet\u003c\/li\u003e\n\u003cli\u003eESC: 80A\u003c\/li\u003e\n\u003cli\u003eRequired servos: Fuselage: Two \u003cspan\u003e31.5 x 16.5 x 29.5, Wing: Six\u003c\/span\u003e 30x10x35,5 mm    \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45075136217225,"sku":"133500","price":330.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/spike.jpg?v=1766183418"},{"product_id":"topmodel-falcon-1-5m","title":"TopModel Falcon 1.5m","description":"\u003cp\u003eThis \"warmliner\" features a lightweight but strong carbon reinforced gelcoat fiberglass fuselage and canopy and two piece, foam core sheeted wing, along with a removable horizontal stab, letting it pack flat for take anywhere aerobatic, slope and even thermal soaring fun.\u003c\/p\u003e\n\u003cp\u003e A thin, slippery airfoil lets the Falcon slice through the air with that familiar swoosh with each speed pass while large control surfaces make the Falcon extra maneuverable for excellent aerobatic performance and allow for the use of flaperons for landing at those smaller strips. This combined with a vibrant color scheme make for a model that will turn heads at your field. \u003c\/p\u003e\n\u003cp\u003eDue to the smaller steel rod wing joiner on this model, we recommend keeping the wing \"G\" loading on the responsible side.\u003c\/p\u003e\n\u003cp\u003eIf you would like help selecting a power system for this model, please reach out to us, happy to help get the perfect match for you.\u003c\/p\u003e\n\u003cp\u003eManual \u003ca href=\"https:\/\/www.topmodelcz.cz\/resources\/upload\/data\/361_Falcon%20El%20WEB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eHere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWingspan: 1500 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuselage Length: 875 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlying Weight: From 950 g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Area: Approx. 19.9 dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Loading: From approx. \u003cspan\u003e47,7\u003c\/span\u003eg\/dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAirfoil: MH32 mod.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRC functions: Elevator, Rudder, Motor, Ailerons\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBattery: 3S 1000-1300mAh\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor: Dualsky XM3036EG-11\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProp: 9x5\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpinner: Turbo 30mm with 5mm collet\u003c\/li\u003e\n\u003cli\u003eESC: 40A\u003c\/li\u003e\n\u003cli\u003eRequired Servos: Fuselage: Two ES08MDII\u003cspan\u003e, Wing: Two BMS115 WV+ or ES3352 (With modification to servo mounts)\u003c\/span\u003e   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Green","offer_id":45184393543817,"sku":"020144EARF","price":312.0,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":45395624657033,"sku":"Falcon 1.5m red","price":312.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/Falcon1.jpg?v=1769123061"},{"product_id":"spinner-for-1404-motors","title":"Mini R\/C Folding Spinner (28mm)","description":"\u003cp\u003eThis is an in house manufactured 28mm spinner assembly that bolts onto the Emax ECO 1404 motor for use with our Gentle Lady Evo or any other small and lightweight R\/C glider.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFeatures a length of 22mm, \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eDiameter 28mm, \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ean integral 4mm yoke with 1.5mm stainless steel blade retaining pins. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWe recommend this set of blades;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e4.5x3\u003c\/p\u003e\n\u003cp\u003eBlades and motor sold separately.\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":45161141043337,"sku":null,"price":8.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/1000125169.jpg?v=1768427987"},{"product_id":"55mm-x-2mm-axle-parkflyer-wheel","title":"Orbit Star 55 Foam Wheel","description":"\u003cp\u003eAn inexpensive foam wheel for lightweight park flyer models.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e55mm Diameter\u003c\/li\u003e\n\u003cli\u003e10mm Width\u003c\/li\u003e\n\u003cli\u003e2mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45178571030665,"sku":"HY006-02901","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/55mm.jpg?v=1769030121"},{"product_id":"orbit-star-60-foam-wheel-copy","title":"Orbit Star 60 Foam Wheel","description":"\u003cp\u003eAn inexpensive foam wheel for lightweight park flyer models.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60mm Diameter\u003c\/li\u003e\n\u003cli\u003e10mm Width\u003c\/li\u003e\n\u003cli\u003e2mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45178590986377,"sku":"HY006-02902","price":2.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/60.jpg?v=1769032252"},{"product_id":"orbit-star-64-foam-wheel","title":"Orbit Star 64 Foam Wheel","description":"\u003cp\u003eAn inexpensive foam wheel for lightweight park flyer models.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e64mm Diameter\u003c\/li\u003e\n\u003cli\u003e10mm Width\u003c\/li\u003e\n\u003cli\u003e2mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45178652524681,"sku":"HY006-02904","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/64.jpg?v=1769032827"},{"product_id":"orbit-star-76-foam-wheel","title":"Orbit Star 76 Foam Wheel","description":"\u003cp\u003eAn inexpensive foam wheel for lightweight park flyer models.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e76mm Diameter\u003c\/li\u003e\n\u003cli\u003e13mm Width\u003c\/li\u003e\n\u003cli\u003e2mm Axle Hole\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45178655735945,"sku":"HY006-02903","price":3.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/76.jpg?v=1769033213"},{"product_id":"orbit-g-60-esc-60a-esc-with-telemetry","title":"Orbit G-60 ESC (60A ESC for Powered Gliders With Telemetry)","description":"\u003cp\u003eA compact, high quality, telemetry capable, 60A 2-6s ESC that does it all! Now with motor brake preset and even more compact to fit smaller R\/C glider fuselages.\u003c\/p\u003e\n\u003cp\u003eThis 60 Amp Electronic Speed Controller blends quality electrical components with the new ESCape32 firmware, which offers\u003cspan\u003e smooth and efficient motor drive, fast transitions from a complete stop to full throttle when needed, robust direction reversals for reversible motor applications, and maximum hardware support. It can even be configured as a brushed ESC if needed. The Orbit G-60 is able to run on 2s to 6s and has a powerful 5A adjustable BEC, which can be configured along with the various program settings accessible via the ESCape32 Wi-Fi Link (Sold separately) when coupled with your smartphone or even your PC, there's no app or software to download either. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1250\" height=\"703\" src=\"https:\/\/www.youtube.com\/embed\/b5pWWHEmm2A\" title=\"ESCape32 Brushless ESC - Programming Over Wi-Fi  - Crawler\/Brushed Mode\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese ESCS also offer telemetry, negating the need for several otherwise bulky sensors and are able to communicate via S.port (FrSky), KISS (KISS FC) and CRSF (TBS Crossfire). Connect a single wire from the ESC's Telemetry solder pad to your receiver\/Flight controller's Telemetry port and you'll get the following telemetry, all built into the ESC!\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal Battery Voltage\u003c\/li\u003e\n\u003cli\u003eConsumed mAh\u003c\/li\u003e\n\u003cli\u003eRPM\u003c\/li\u003e\n\u003cli\u003eAmps\u003c\/li\u003e\n\u003cli\u003eESC Temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 34 x 23 x 6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 23g\u003c\/li\u003e\n\u003cli\u003eAmp rating: 60A\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 2-6S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45247325012105,"sku":"orbit-g-60","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/g60-1.jpg?v=1771442556"},{"product_id":"x30-plug-caps","title":"XT30 Charge Status Caps","description":"\u003cp\u003eAn easy way to keep track of which batteries are charged and which ones are depleted; as well as protecting your batteries from unintentional shorts. Just install with the red side facing out after flying and and the green side after charging.\u003c\/p\u003e\n\u003cp\u003e3D printed in TPU (Thermo plastic polyurethane), these XT30 caps are soft and pliable, making them easy to install and remove.\u003c\/p\u003e\n\u003cp\u003eSold in packs of 10\u003c\/p\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":45300728299657,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/xt30caps-1.jpg?v=1773797916"},{"product_id":"clm-pro-prime-q","title":"CLM Pro Prime Q RES GLIDER Kit","description":"\u003cp\u003eAfter the great success of the Prime III series in both F3L and F5L classes, CLM Pro has released the next step up: The Prime Q. Featuring the latest in model design from the CLM Pro and R\u0026amp;D once again led by the well-known designer Danko Prprović, the Prime Q is engineered for peak performance in FAI RES F3L competitions.\u003c\/p\u003e\n\u003cp\u003eAt the core of the Prime Q is a brand new airfoil, the DP699 – DP711 which was developed over the past three years in close collaboration with a university aerodynamic lab equipped with a wind tunnel, this airfoil is the result of exhaustive testing and optimization of multiple polar curves to find the ideal aerodynamic balance.\u003c\/p\u003e\n\u003cp\u003eThe model has been flight tested in a wide variety of weather from dead calm to winds approaching 30 MPH and has proven itself to be a winning design in competitions all across Europe, consistently proving its quality by achieving podium finishes. Where the Prime Q truly excels is in its ability to respond to even the weakest thermals. Even a tiny bubble of lift is enough and once hooked in, it climbs smoothly.\u003c\/p\u003e\n\u003cp\u003eWith the Prime Q, CLM Pro sets a new benchmark in the RES class with precision engineering, competitive performance and thoughtful design for both builder and pilot, whether you're training, competing, or simply chasing thermals for the fun of it with its unmatched combination of performance, handling, and build quality.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRIME Q – Feature Highlights:\u003c\/strong\u003e\u003cbr\u003e- High-performance all-rounder for all weather conditions\u003cbr\u003e- Larger root chord and elliptical wing shape, inspired by Prime III\u003cbr\u003e- Bigger, perforated spoilers for enhanced braking efficiency\u003cbr\u003e- Expanded wing area – 37 dm²\u003cbr\u003e- New airfoil: DP699 - DP771\u003cbr\u003e- Designed specifically for RES class\u003cbr\u003e- Improved glide ratio and energy retention\u003cbr\u003e- Better wind penetration\u003cbr\u003e- Higher launch height than Prime III\u003cbr\u003e- Ballast system in fuselage (as in Prime III), but upgraded with quick-release ballast hatch. (no screws – swap in seconds)\u003cbr\u003e- Available in both Cross-tail and V-tail configurations\u003cbr\u003e- Easier and more precise build process:\u003cbr\u003e- Assembly on a laser-engraved jig – no more Styrofoam templates\u003cbr\u003e- Uses a 3 mm laser-cut plywood jig for higher precision and repeatability\u003cbr\u003e- Full-size 1:1 building plans included\u003cbr\u003e- Building Instruction manual in PDF: \u003ca href=\"https:\/\/www.dropbox.com\/scl\/fi\/1bfqqjzagb7gkbkiew65t\/Prime-Q-F3L-X-tail-building-manual.pdf?rlkey=6qgzsz6cxqdc4gtttnq50crxi\u0026amp;st=8tom5aqk\u0026amp;dl=1\"\u003eCLICK HERE FOR DOWNLOAD\u003c\/a\u003e – 110 full-color pages with photo strip guidance\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrime Q specifications: \u003c\/strong\u003e         \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWingspan: 1992 mm (78.43\")\u003c\/li\u003e\n\u003cli\u003eLength: 1398 mm (55.03\")\u003c\/li\u003e\n\u003cli\u003eWing area: 37 dm2 (542 sq. in.)\u003c\/li\u003e\n\u003cli\u003eAirfoils: DP699 – DP711\u003c\/li\u003e\n\u003cli\u003eWeight structure: 310 g (10.93 oz)\u003c\/li\u003e\n\u003cli\u003eWeight covered: 345 g (12.20 oz)\u003c\/li\u003e\n\u003cli\u003eFlying weight from: 470g (16.60 oz)\u003c\/li\u003e\n\u003cli\u003eControl surfaces: Rudder, Elevator, Spoiler\u003c\/li\u003e\n\u003cli\u003eCenter of gravity: 82-84 mm from wing leading edge. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended unpowered glider setup:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRudder \/ Elevator Servos: KST 08, CHA DS09, EMAX ES08MA II\u003c\/li\u003e\n\u003cli\u003eSpoiler Servos: KST X06H V6, EMAX ES9051, CHA DS06\u003c\/li\u003e\n\u003cli\u003eBattery Options: Li-ion 1S \/ 2600 mAh; 2S LiPo 300–850 mAh; NiMh 300–700 mAh\u003c\/li\u003e\n\u003cli\u003eReceiver: 4- or 5-channel receiver compatible with your radio.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrime Q Control Throws:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRudder: 20 mm each way, expo 10–20%\u003c\/li\u003e\n\u003cli\u003eElevator: 14 mm each way, expo 10–20%\u003c\/li\u003e\n\u003cli\u003eSpoiler: 80° up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrime Q weight of parts: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuselage: 52g (1.83 oz)\u003c\/li\u003e\n\u003cli\u003eTail boom: 17g (0.59 oz)\u003c\/li\u003e\n\u003cli\u003eV-tail: 12g (0.42 oz)\u003c\/li\u003e\n\u003cli\u003eCenter panel half: 50g (1.76 oz)\u003c\/li\u003e\n\u003cli\u003eMiddle wing panel: 30g (1.05 oz)\u003c\/li\u003e\n\u003cli\u003eTip panel: 12g (0.42 oz)\u003c\/li\u003e\n\u003cli\u003eTow hook: 7g (0.24 oz)\u003c\/li\u003e\n\u003cli\u003eCarbon joiner: 6g (0.21 oz)\u003c\/li\u003e\n\u003cli\u003eBolts: 3g (0.10 oz)\u003c\/li\u003e\n\u003cli\u003eBowdens: 10g (0.35 oz)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"V Tail - Glider","offer_id":45396770881673,"sku":"Prime Q V tail Glider","price":300.0,"currency_code":"USD","in_stock":true},{"title":"Cross Tail - Glider","offer_id":45396770914441,"sku":"Prime Q X tail Glider","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/primq1.jpg?v=1773783355"},{"product_id":"sm-modell-bau-microvario-tek-vario","title":"SM Modell Bau MicroVario (for TEK Vario)","description":"\u003cp\u003eTruly tiny! And yet the MicroVario is a fully-fledged TEK variometer with high-quality pressure sensors and a three-axis accelerometer. It offers full telemetry support for Jeti Duplex , Multiplex M-Link , Graupner HoTT , Futaba , JR DMSS , FrSky , Spektrum (via Spektrum adapter), and PowerBox Core .\u003c\/p\u003e\n\u003cp\u003eLink to the English Manual: \u003ca title=\"English Manual\" href=\"https:\/\/www.sm-modellbau.de\/pdf\/SM%20MicroVario%20v1.05%20in%20English.pdf\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe offer the TEK probes separately. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExtremely small and extremely light weighing only 1.8 g without cables.\u003c\/p\u003e\n\u003cp\u003eThe  MicroVario uses a built-in high-resolution pressure sensor and telemetry to provide a high-quality variometer reading. Its integrated TEK port also allows the use of compensation nozzles. This results in a variometer function that accurately displays true climb and sink rates, independent of stick thermals. For precise altitude measurement, even when using a TEK nozzle, a second pressure sensor is integrated, delivering accurate altitude data regardless of airspeed.\u003cbr\u003eWhen using a TEK nozzle, airspeed is also measured and displayed without the need for additional sensors.\u003c\/p\u003e\n\u003cp\u003eThe built-in 3-axis accelerometer with a measuring range of up to 16 g provides information about the stresses during flight.\u003c\/p\u003e\n\u003cp\u003eIn line with our philosophy of supporting as many systems as possible, the MicroVario also supports telemetry from :\u003c\/p\u003e\n\u003cp\u003eJeti Duplex\u003cbr\u003eMultiplex M-Link\u003cbr\u003eGraupner HoTT\u003cbr\u003eFutaba\u003cbr\u003eJR DMSS\u003cbr\u003eFrSky\u003cbr\u003eSpectrum (via Spectrum adapter)\u003cbr\u003ePowerBox Core\u003cbr\u003eThe telemetry method used only needs to be specified once in the MicroVario settings. This is done either via our PC program \"SM MicroVario Tool \" or with the UniDisplay. HoTT is selected by default .\u003c\/p\u003e\n\u003cp\u003eAnd this is what the MicroVario can do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-resolution vario with TEK connection\u003c\/li\u003e\n\u003cli\u003eAltitude measurement with a second pressure sensor with automatic zeroing after switching on\u003c\/li\u003e\n\u003cli\u003eAirspeed measurement via a TEK nozzle\u003c\/li\u003e\n\u003cli\u003eIntegrated 3-axis accelerometer up to ±16 g\u003c\/li\u003e\n\u003cli\u003eFull telemetry support for Jeti Duplex (EX), Multiplex M-Link , Graupner HoTT ,\u003c\/li\u003e\n\u003cli\u003eFutaba FASSTest S.BUS2, JR DMSS , FrSky , Spektrum and PowerBox Core\u003c\/li\u003e\n\u003cli\u003eConnection for receiver signal for remote control of certain functions\u003c\/li\u003e\n\u003cli\u003eMeasurement of receiver battery voltage\u003c\/li\u003e\n\u003cli\u003eCurrent status is indicated via LED.\u003c\/li\u003e\n\u003cli\u003eDirect viewing of the measured values live with our UniDisplay\u003c\/li\u003e\n\u003cli\u003eParameter settings possible via PC, UniDisplay and telemetry\u003c\/li\u003e\n\u003cli\u003eFree firmware updates are possible via PC using our USB interface (Order No. 2550) or with existing USB connection cable.\u003c\/li\u003e\n\u003cli\u003eDue to its compact size and low weight, it can be used almost anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor technical specifications and the complete range of functions, please refer to the operating instructions .\u003c\/p\u003e\n\u003cp\u003eTechnical Data:\u003c\/p\u003e\n\u003cp\u003eVario resolution: .001 m\/s\u003cbr\u003eVario noise: typically less than 0.02 m\/s\u003cbr\u003eResolution of altitude measurement: .1 m\u003cbr\u003eAccelerometer: 3 axes up to 16 g\u003cbr\u003ePower supply: from receiver supply (from 3.6 V to a maximum of 8.5 V)\u003cbr\u003ePower consumption: approx. 24 mA\u003cbr\u003eDimensions: 26 (33 with plug) x 12 x 7 mm\u003cbr\u003eWeight: 1.8 g without cable \/ 5.4 g with 30 cm standard cable\u003cbr\u003eConnections: \u003cbr\u003e  1 x connection for telemetry and power supply (\"Link\")\u003cbr\u003e  1 x servo pulse input from receiver\u003cbr\u003e  COM port for UniDisplay and firmware update\u003cbr\u003e  Port for TEK nozzle\u003cbr\u003e\u003c\/p\u003e","brand":"SM Modell Bau","offers":[{"title":"Default Title","offer_id":45400722407561,"sku":null,"price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/microvario_e9b62e94-75ef-470c-a6fc-9288bd39cc4b.jpg?v=1773796545"},{"product_id":"nobow","title":"NoBo 2 Meter - RES F3L F5L 4K","description":"\u003cp\u003eWant to fly RES (F3L, F5L) with one of the latest high performance RES  models? This is your solution! A beautiful design that will catch other pilots eyes as well as it catches thermals. Be sure to check the videos below to get an idea of her performance.\u003c\/p\u003e\n\u003cp\u003eWhy is it called NoBo? - The NoBo comes from the same folks that bring us the amazing family of BOW flying wings. We offer their Bow DLG and Repus RES flying wing designs. The NoBo is a little pun basically stating that this is not a flying wing.\u003c\/p\u003e\n\u003cp\u003eThe BOW team uses cutting edge software specially designed for the low reynolds number aerodynamics that our gliders operate in. This gives unheard of ability to accurately confirm their ideas and refine designs, greatly improving performance. And the NoBo is proving just this in competitions. \u003c\/p\u003e\n\u003cp\u003eNoBo – Competitive Successes for 2024-25\u003c\/p\u003e\n\u003cp\u003eF3L\u003cbr\u003e1st place | F3L Koasapokal | 25.05.2024 | Franz Heindler\u003cbr\u003e2nd Place | F3L Eurocontest Xeis-Pokal | 17.–18.08.2024 | Harald Helm\u003cbr\u003e1st place | F3L Liezener Cup | April 12, 2025 | Harald Helm\u003cbr\u003e1st Place | F3L Kremstal Cup | 21.09.2025 | Harald Helm\u003cbr\u003e1st place | F3L Upper Austrian State Championship | September 21, 2025 | Harald Helm\u003cbr\u003e1st Place | F3L Kremstal Cup | 20.09.2025 | Harald Helm\u003cbr\u003e1st place | F3L Austrian Championship | 20.09.2025 | Harald Helm\u003cbr\u003e1st place | F3L Upper Austrian State Championship | 20.09.2025 | Harald Helm\u003c\/p\u003e\n\u003cp\u003eF5L\u003cbr\u003e1st place | F5L Upper Austrian State Championship | May 10, 2025 | Viktor Koch4th place | F5L Herzmostviertel Cup | October 18, 2025 | Viktor Koch\u003c\/p\u003e\n\u003cp\u003eA two piece, two meter wing with an all new, computer engineered airfoil equipped with twin turbulators and super low wing loading combined with a ready to fly weight under 20 oz makes catching even the weakest lift possible. When you're done specking out in that big boomer, use the spoilers to bring her in for spot landing.\u003c\/p\u003e\n\u003ch3\u003eNoBo 4K\u003c\/h3\u003e\n\u003cp\u003eIf you aren't bound by RES competition rules and want even more performance, the NoBo is also available in a 4 servo wing configuration, allowing for full trailing edge  camber\/reflex mixing and more accurate control. Pilots report that it handles a lot like a large DLG in this configuration.\u003c\/p\u003e\n\u003cp\u003eFeatures an all CNC cut wood and carbon tube spar construction and quality, easy to follow build plans.\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3L (RES) =\u0026gt; High start\u003c\/li\u003e\n\u003cli\u003eF5L (E-RES) =\u0026gt; Electric motor\u003c\/li\u003e\n\u003cli\u003eWingspan: approx. 2m\u003c\/li\u003e\n\u003cli\u003eFuselage Length: 1135mm\u003c\/li\u003e\n\u003cli\u003eWeight: from 330g\u003c\/li\u003e\n\u003cli\u003eControls: Elevons, Spoilers (Motor is possible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe spoilers are very easy to control as there is no load change.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwin Turbulators for improved aerodynamic performance.\u003c\/li\u003e\n\u003cli\u003eUses an all new high performance airfoil.\u003c\/li\u003e\n\u003cli\u003eThe NoBo complies with the competition regulations of the FAI classes F3L (formerly RES) and F5L if set up for electric (formerly E-RES)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe NoBo specializes in thermal soaring galore! \u003cspan\u003eHave a look at these flight videos that show the true performance of this highly engineered design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA bit of light slope\/thermal:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"1268\" height=\"713\" src=\"https:\/\/www.youtube.com\/embed\/_JHIoPqzbB0\" title=\"NOBO199 Prototyp\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn the Hi Start for some training flights flying with its sister ship the Repus:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"1268\" height=\"713\" src=\"https:\/\/www.youtube.com\/embed\/fWNvnlahD1g\" title=\"Winter-Training\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 4 servo (4k) version set up on Electric Power:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"1895\" height=\"885\" src=\"https:\/\/www.youtube.com\/embed\/3CF2H274ZMo\" title=\"NoBo 199 4K Erstflug in Weiz\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDetailed build\/discussion thread in German can be found HERE. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilder guide in English can be found \u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/file\/d\/1CocTNz-IlYHDltbRvpyAxYlzxnJvYgcT\/view?usp=sharing\" target=\"_blank\"\u003eHere\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eFor electric the suggested power system is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor: 22mm outside diameter, 30 grams or less, DYS D2225-19 1350kv, DYS D2225-13 2000kv, or Dualsky 221EG, or Dualsky 2225EG\u003c\/li\u003e\n\u003cli\u003eESC: ESCape32 Mini 2 25A, or Hobbywing Mini 30. \u003c\/li\u003e\n\u003cli\u003eProp: Maximum of 8\" diameter.\u003c\/li\u003e\n\u003cli\u003eBattery: Tattu R-Line 3S 550mAh 95C XT30 or Tattu Long 3S 450mAh 75C XT30\u003c\/li\u003e\n\u003cli\u003eSpinner: 32mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat's included with the kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Size Plans\u003c\/li\u003e\n\u003cli\u003ePrecision-cut, CNC-milled components made of balsa and plywood for wings\/tail assembly, trailing edges\u003c\/li\u003e\n\u003cli\u003eFuselage Pod and Boom components\u003c\/li\u003e\n\u003cli\u003eAll semi-finished products made of carbon fiber (spars, leading edge, control horns, etc.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther suggested items:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 KST A08 servos\u003c\/li\u003e\n\u003cli\u003e2 spoiler servos (e.g., EMAX ES9052MD)\u003c\/li\u003e\n\u003cli\u003e2 MPX original gold-plated high-current sockets (6-pin, green)\u003c\/li\u003e\n\u003cli\u003e2 MPX original gold-plated high-current plugs (6-pin, green)\u003c\/li\u003e\n\u003cli\u003e1.0mm or 1.2mm steel wire for linkages\u003c\/li\u003e\n\u003cli\u003eGP 400mAh\/4.8V 2x2 universal batteries (glider version)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMedium\/thin cyanoacrylate adhesive with \u003cmeta charset=\"utf-8\"\u003edispensing tips\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCovering film (OraLight)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRC system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BOW-Wings","offers":[{"title":"RES","offer_id":45402842628233,"sku":"NoBo-FxL","price":288.0,"currency_code":"USD","in_stock":true},{"title":"4K (4 Servo Wing)","offer_id":45466415333513,"sku":"NoBo-4K","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Fuselage, Glider","offer_id":45466882736265,"sku":"nobo-fuse-unpowererd","price":107.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/nobo2.jpg?v=1774543788"},{"product_id":"topmodel-nike-evo-1-7m","title":"TopModel Nike EVO 1.7m","description":"\u003cp\u003eThis 1.7m \"warmliner\" features a lightweight but strong carbon reinforced gelcoat fiberglass fuselage and canopy and two piece, foam core, wood sheeted wing, along with a removable full flying horizontal stab, letting it pack easily for transport to aerobatic, slope and even thermal soaring fun.\u003c\/p\u003e\n\u003cp\u003e A nice, all rounder type airfoil lets the Nike EVO slice through the air with that high speed swoosh with each speed pass and still be able to float around decently in thermals, while a full flying stabilator and large control surfaces make her extra maneuverable for excellent aerobatic performance, the well sized Ailerons will allow for the use of flaperons, making landing at those smaller strips easier. \u003c\/p\u003e\n\u003cp\u003eThe electric power system listed below, made from components we normally stock should give excellent performance for most pilots. If you would like help selecting an alternate power system for this model, please reach out to us, we are happy to help get the perfect match for you.\u003c\/p\u003e\n\u003cp\u003eManual: \u003ca rel=\"noopener\" href=\"https:\/\/www.topmodelcz.cz\/resources\/upload\/data\/266_Nike%20EVO%20manual%20web.pdf\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs and recommended power system:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWingspan: 1700 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuselage Length: 1135 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlying Weight: From 1.2 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Area: Approx. 27.8 dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Loading: From approx. \u003cspan\u003e43.2\u003c\/span\u003eg\/dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAirfoil: MH32\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRC functions: Elevator, Motor, Ailerons\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBattery: 3S or 4s 2200-3300mAh\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor: Emax GT2826 860kv\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProp: 13x8\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpinner: Turbo 42mm with 5mm Turbo Spinner collet\u003c\/li\u003e\n\u003cli\u003eESC: 80A\u003c\/li\u003e\n\u003cli\u003eRequired Servos: Fuselage: One Emax \u003cspan\u003eES3352\u003c\/span\u003e\u003cspan\u003e, Wing: Two Emax ES09MD\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Red","offer_id":45501791305865,"sku":"02025ARF-Red","price":345.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":45501791338633,"sku":"02025ARF-White","price":345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/nike1.jpg?v=1776291487"},{"product_id":"tatrman-f5j","title":"Tatrman F5J 3.9m","description":"\u003cp\u003eWe are pleased to offer the VP Models as they are true masters of the XPS bagged wing construction methods. The results of this method are very competitive models with a very attractive price point. With a focus on the competition pilot but priced in a range where non-professionals can enjoy them.\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003eThe Tatrman F5J is just that, VP models' most F5J-focused aircraft for a fraction of the cost of comparable models. The 3.9 meter span, 3 piece vacuum bagged wing and tail are made from an XPS core sheeted in biaxial carbon fiber, giving the model excellent torsional rigidity and significantly higher surface resistance compared to models utilizing mostly glass fiber. \u003c\/span\u003e\u003cspan dir=\"auto\"\u003eAdditional longitudinal strength is provided by a carbon flange with a web under the biaxial surface at the wing joints.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003eThe rudder is laminated in a combination of biaxial and glass fabric, which is very stiff and features a color dyed core, which glows beautifully in the sun. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003eThe Tatrman F5J uses a combination of modified AG airfoils that allow for exceptional thermal and penetration performance.\u003cspan\u003e \u003c\/span\u003eFull camber\/reflex of the trailing edge ensures a wide range of performance for various conditions.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan dir=\"auto\"\u003eThe fuselage is all carbon with hardened reinforcement in fragile areas, there is even a ballast chamber.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003eBrowse the build manual here: \u003ca href=\"https:\/\/docs.google.com\/document\/d\/171w1WKIHB9wr9ubBitM6H749dAlp_p6Zd5LwTcecT7o\/edit?usp=sharing\" title=\"Tatrman F5J - Manual\" rel=\"noopener\" target=\"_blank\"\u003eCLICK HERE FOR DOWNLOAD\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eRecommended equipment:\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eMotors: \u003c\/strong\u003e\u003cspan\u003e Dualsky \u003c\/span\u003eXM3036EG-11 (1370KV), XPower F2919\/10 Light (1480KV), MEGA 16\/15\/5CE F5J, MEGA 16\/25\/4 CE F5J, Dualsky XM3040EG-14 (860KV)\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003ePropellers:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e10x6, 11x5, 12x8 - according to motor KV, with 32mm spinner\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eESC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e35A+ with at least 4A BEC\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eWing servos:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eKST X10 Mini Pro A, KST HS08 A, MKS HV6120, MKS HV6130, KST X10 PLUS A, KST X08H PLUS, Chaservo HV85H\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eTail servos:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eKST X08 V6, KST A08 V6, MKS HS75H, MKS HV70H, Bluebird BMS-A10H\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eBasic model settings:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAilerons: -10mm \/+ 21mm (in all modes)\u003cspan\u003e Rudder\u003c\/span\u003e: -11\/+15mm\u003cspan\u003e Elevator\u003c\/span\u003e: -\/+45mm\u003cspan\u003e \u003c\/span\u003eBrakes: flaps -70-90°, ailerons +3mm,\u003cspan\u003e \u003c\/span\u003eSubtrim flaps: speed +3mm, normal +-0, thermals max. -7mm,\u003cspan\u003e \u003c\/span\u003eSubtrim ailerons: speed +1.5mm, normal +-0, thermals max. -5mm\u003cspan\u003e \u003c\/span\u003eBasic center of gravity: 105-115mm from the leading edge.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/a7xKstmNLy8?si=qxEOHC7Plr4K0v1j\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Yellow","offer_id":45590832119945,"sku":"vp-tatrman-f5j-yellow","price":1500.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/tatrman1.jpg?v=1776289722"},{"product_id":"jiri-models-escape-pylon-racer","title":"Escape Pylon Racer","description":"\u003cp\u003eThe Escape is an approximately one meter span speed ship that features a very lightweight but strong hollow molded construction thanks to the use of quality materials and excellent European craftsmanship, allowing for an aircraft that will easily get to 150 MPH and well beyond with the right power system while still able to fly reasonably slow for landing.\u003c\/p\u003e\n\u003cp\u003eIncludes motor mount, wing mounting hardware, wire pushrods and ultra lightweight servo covers. \u003c\/p\u003e\n\u003cp\u003eBuild photos: \u003ca rel=\"noopener\" href=\"https:\/\/www.rajce.idnes.cz\/jiri-model\/album\/escape-sestaveni\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDiscussion: \u003ca href=\"https:\/\/www.rc-network.de\/threads\/escape-pylon-von-jiri-model-cz.799082\/\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFlight Footage: \u003ca href=\"https:\/\/vimeo.com\/2997976\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWingspan: 994mm\u003c\/li\u003e\n\u003cli\u003eFuselage Length: 670mm\u003c\/li\u003e\n\u003cli\u003eEmpty Airframe Weight: 205g\u003c\/li\u003e\n\u003cli\u003eFlying Weight: From 450g\u003c\/li\u003e\n\u003cli\u003eAirfoil: MH43\u003c\/li\u003e\n\u003cli\u003eCG: 43-45mm from wing L.E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Recommended Power System (Run on 3s or 4S 1300mAh):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor: \u003ca href=\"http:\/\/www.highendrc.com\/index_eproduct_view.php?products_id=29\" target=\"_blank\"\u003eHET Typhoon EDF 4W\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eESC: \u003ca href=\"https:\/\/alofthobbies.com\/products\/hobbywing-skywalker-30a-esc-v2-mini?_pos=17\u0026amp;_sid=5e8fa96ee\u0026amp;_ss=r\" target=\"_blank\"\u003e30A\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProp: \u003ca href=\"https:\/\/alofthobbies.com\/products\/super-s-carbon-speed-5x5-13x13cm-8mm-bore?_pos=26\u0026amp;_sid=6fd2d11bf\u0026amp;_ss=r\" target=\"_blank\"\u003e5x5\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpinner: \u003ca href=\"https:\/\/alofthobbies.com\/products\/aloft-aluminum-propeller-spinner-30-50mm?_pos=4\u0026amp;_sid=453e5ac6c\u0026amp;_ss=r\" target=\"_blank\"\u003e30mm with 3.17mm collet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eServos: 3x \u003ca rel=\"noopener\" href=\"https:\/\/alofthobbies.com\/products\/emax-es08mdii-servo-2kg-27-77-oz-in-10-sec-13-grams?_pos=1\u0026amp;_psq=emax-es08\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eEmax ES08MDII\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft Hobbies","offers":[{"title":"Red\/Black Carbon","offer_id":45591353917577,"sku":null,"price":250.0,"currency_code":"USD","in_stock":false},{"title":"Green\/White Glass","offer_id":45591353950345,"sku":null,"price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/escapered.png?v=1776716643"},{"product_id":"topmodel-agame-2-35m","title":"TopModel Agama 2.35m","description":"\u003cp\u003eThe Agama features a lightweight but strong carbon reinforced gelcoat fiberglass and carbon pod and boom type fuselage and a 2.35m, open structure two piece balsa with carbon tube spar wing, along with a removable horizontal stabilizer for transport to your site for sport or competition thermal soaring fun.\u003c\/p\u003e\n\u003cp\u003e An AG airfoil gives the Agama excellent thermal performance while also letting her penetrate upwind. Large flaps and Ailerons allow for crow\/butterfly mixing for landing at your smaller airfields.\u003c\/p\u003e\n\u003cp\u003eManual: \u003ca href=\"https:\/\/www.topmodelcz.cz\/resources\/upload\/data\/355_Agama.pdf\" rel=\"noopener\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs and recommended power system:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWingspan: 2350 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuselage Length: 1410 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlying Weight: From 1.2 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Area: Approx. 50 dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWing Loading: From approx. 24g\/dm²\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAirfoil: AG\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRC functions: Elevator, Rudder, Motor, Ailerons, Flaps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBattery: 3S 2000-2700mAh\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor: Dualsky XM2838EG-9L\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProp: 10x4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpinner: 32mm with 4mm collet\u003c\/li\u003e\n\u003cli\u003eESC: 40A\u003c\/li\u003e\n\u003cli\u003eRequired Servos:\u003c\/li\u003e\n\u003cli\u003eFuselage: Two BlueBird BMS-125WV+ or Emax ES09MD\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWing: Four BlueBird BMS-115HV+ or Emax ES09MD with modification to included mounts.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Red","offer_id":45699611132041,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/agama1.jpg?v=1778263499"},{"product_id":"orbit-motor-mount-tenshock-30mm","title":"Custom Motor Mounts by Orbit","description":"\u003cp\u003eUsing an advanced engineered plastic makes the Orbit Motor Mounts nearly strong as aluminum and able to handle temperatures up to 260 Celsius (500F), the motor's magnets will be damaged far earlier at around 80C (176F).\u003c\/p\u003e\n\u003cp\u003eNo more fiddling around installing from inside the fuselage and getting the angle straight, these mounts feature a lip on the front that butts up against your aircraft's nose to perfectly set the thrust line at every time.\u003c\/p\u003e\n\u003ch3\u003eDon't see your application, let us know what you need and we can get it ASAP for you. \u003c\/h3\u003e\n\u003cp\u003eTenshock 6 bolt - Hole Pattern: 19mm M3, Designed for Tenshock GDM1510 and GDM1520 geared motors.\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"30mm Tenshock - 6 bolt 3mm holes in a 19mm circle","offer_id":46625423229065,"sku":"orbit mount 30mm tenshock","price":8.0,"currency_code":"USD","in_stock":true},{"title":"32mm Tenshock - 6 bolt 3mm holes in a 19mm circle","offer_id":46625862189193,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"34mm Tenshock - 6 bolt 3mm holes in a 19mm circle","offer_id":46625911472265,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"40mm Tenshock - 6 bolt 3mm holes in a 19mm circle","offer_id":46625985593481,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/tenshockmount-1.jpg?v=1778271615"},{"product_id":"aloft-gift-cards","title":"Aloft Hobbies Gift Card","description":"\u003cp\u003eFolks have been asking for Aloft gift cards for years. Sorry it took so long. \u003c\/p\u003e\n\u003cp\u003eAvailable for yourself, but you know it is best to send to a freind!\u003c\/p\u003e\n\u003cp\u003ePhysical card does not exist, this is an e-card. \u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"$10.00","offer_id":46428331835529,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"$25.00","offer_id":46428331868297,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"$50.00","offer_id":46428331901065,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"$100.00","offer_id":46428331933833,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true},{"title":"200.00","offer_id":46428346712201,"sku":null,"price":200.0,"currency_code":"USD","in_stock":true},{"title":"300.00","offer_id":46428346744969,"sku":null,"price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/aloftgiftcard2.jpg?v=1778005854"},{"product_id":"tjirc-thor-brass-ballast","title":"TJIRC Thor 2 Brass Ballast","description":"\u003cp\u003eThese are approximately 66x25x12mm chunks of Brass to fit in the ballast chamber of your TJIRC Thor 2.\u003c\/p\u003e\n\u003cp\u003eWe have found the length of these bars to vary a bit. Some final filing may be needed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold individually.\u003c\/li\u003e\n\u003cli\u003eabout 163g each.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe also offer ballast spacers for this slug size. \u003ca href=\"https:\/\/alofthobbies.com\/collections\/new-products\/products\/ballast-spacers-10x20x30mm\"\u003eSee this page.\u003c\/a\u003e\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":46717655842953,"sku":"thor2-ballast","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/thorballast_3f55f966-77e9-4e21-9d3b-ea8e5472a6c1.jpg?v=1778693523"},{"product_id":"topmodel-motor-installation-tool","title":"TopModel Motor Installation Tool","description":"\u003cp\u003eThis set of special M3 x 250mm threaded rods allow for easy installation of your motor into the nose of your powered glider. Thread through two of your mount holes, thread into the corresponding two motor screw holes and pull up into your motor mount. Install adjacent mounting screws, then remove rods to install the the rest of your mounting screws.\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":46735403712649,"sku":"020M3250","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/motortool1.jpg?v=1778782388"},{"product_id":"frsky-act-s5412h-servo-30kgf-416-6oz-in-0-05sec-60-copy","title":"FrSky ACT S5414H Servo \/ 63kgf (874.9oz-in) \/ 0.08sec\/60°","description":"\u003cp\u003eThe FrSky ACT series coreless servos utilize a fully CNC machined aluminum case and metal gears. These high-voltage servos are capable of supporting up to 8.4V and offer both high speed and torque performance.\u003c\/p\u003e\n\u003cp\u003eUnlike other FrSky servos, the ACT line offers no telemetry. This is a \"normal\" servo. Like all almost all servos on the market, this \"Standard Size\" servo is happy to connect to just about any receiver regardless of brand.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh durability with metal gear and all-aluminum CNC machined protective case\u003c\/li\u003e\n\u003cli\u003e4.8 - 8.4V high voltage capable operation with high speed and big torque performance\u003c\/li\u003e\n\u003cli\u003eBuilt-in dual precision balls bearing with potentiometer sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage Range: 4.8V-8.4V\u003c\/li\u003e\n\u003cli\u003eTorque:\u003cspan\u003e47 kgf.cm@6.0V, 55 kgf.cm\u003c\/span\u003e@7.4V, \u003cspan\u003e63 kgf.cm\u003c\/span\u003e@8.4V\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.16sec\/60°@4.8V, 0.8sec\/60°@6.0V, 0.10sec\/60°@7.4V,0.12sec\/60°@8.4V\u003c\/li\u003e\n\u003cli\u003eWorking Frequency: 1520μs\/333Hz\u003c\/li\u003e\n\u003cli\u003eDefault Travel Angle: ±60°=120° Total\u003c\/li\u003e\n\u003cli\u003eCase Material: Aluminium Alloy\u003c\/li\u003e\n\u003cli\u003eMotor Type: Coreless DC Motor\u003c\/li\u003e\n\u003cli\u003eGear Set Material: Hardened Steel\u003c\/li\u003e\n\u003cli\u003ePosition Sensor: Potentiometer\u003c\/li\u003e\n\u003cli\u003eCase Dimensions: 40mm*20mm* 39mm±0.2mm\u003c\/li\u003e\n\u003cli\u003eWeight: 80g\u003c\/li\u003e\n\u003cli\u003eHorn Spline \u003cspan\u003eΦ6 25T\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Aloft Hobbies","offers":[{"title":"Default Title","offer_id":46742173352073,"sku":"030506622605","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/4-4_355de8ea-c774-461e-ad62-e547efe6cc58.jpg?v=1773769402"},{"product_id":"ballast-spacers","title":"Ballast Spacers","description":"\u003cp\u003eBallast spacers for your ballast tubes. These spacers allow you to run a partial ballast load and keep your ballast from sliding around. \u003c\/p\u003e\n\u003cp\u003e3D printed spacers are light but strong. We like to radius the corners and add a 3mm hole down the middle. This helps to keep the lightweight spacers from getting stuck, and if they should, the hole makes it much easier to capture them with a screw.\u003c\/p\u003e\n\u003ch2\u003eNeed a custom size?\u003c\/h2\u003e\n\u003cp\u003eLet us know, we can produce them fast to meet your needs. Round, square, whatever!\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"Aloft Hobbies","offers":[{"title":"10x20x30mm (TJI and others)","offer_id":46758326042761,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"66x25x12mm (Thor.2)","offer_id":46758340329609,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/asset_cm9pdgxyb_1779134619362_f2fed929-8732-4521-8086-3eef109dc2e2.jpg?v=1779135948"},{"product_id":"dualsky-ds169-2-8kg-38-8-oz-in-0-06-sec-9g-copy","title":"Dualsky T8 Servo 3.0kg (41.6 oz in), 0.08 sec - 10.6g","description":"\u003cp\u003eDualsky presents the T8 servo, a quality option for those wanting a full metal, high voltage servo with all the speed, power and robustness of more expensive servos, but don't want to break the bank.\u003c\/p\u003e\n\u003cp\u003eA programmable digital circuit (via the Dualsky USB LINK MP Tool) and a quality potentiometer are the brains of the operation and the brawn is an ultra responsive coreless motor, which drives a strong, ultra low low backlash steel gear train. The output spline is supported at each end by quality ball bearings, all in a CNC machined Aluminum case for superb heat dissipation. \u003c\/p\u003e\n\u003cp\u003e The T8 also features a wide voltage range from 3.8v to 8.4v, for use with single or two cell LiPo power, or anything in between. Its 8mm thickness lets it fit into many thin servo pockets making them a great choice for F3K, F5K, eRES, F5J Lite, F5J or anywhere else you need a robust, lightweight, fast, powerful and affordable high voltage servo.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage Range: 3.8V-8.4V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTorque: 1.3 kgf.cm@3.8V, 2.0 kgf.cm@6.0V, 2.6 kgf.cm@7.4V, 3.0 kgf.cm@8.4V\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.16sec\/60°@3.8V, 0.12sec\/60°@6.0V, 0.09sec\/60°@7.4V,0.08sec\/60°@8.4V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorking Frequency: up to 333Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDeadband\/Resolution: 2µs (Programmable)\u003c\/li\u003e\n\u003cli\u003eDefault Travel Angle: ±50°=100° Total\u003c\/li\u003e\n\u003cli\u003eMax Travel Angle: 180°\u003c\/li\u003e\n\u003cli\u003eCase Material: Aluminum Alloy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor Type: Coreless DC Motor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGear Set Material: Hardened Steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePosition Sensor: Potentiometer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCase Dimensions: 23.5mm*8mm* 22.3mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6g with wire (150mm With JR Plug)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHorn Spline Φ3.9mm 15T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":46778783989897,"sku":"22374","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/T8.jpg?v=1779402576"},{"product_id":"dualsky-t8f-wing-servo-3-0kg-41-6-oz-in-0-08-sec-10-6g","title":"Dualsky T8F Wing Servo 3.0kg (41.6 oz in), 0.08 sec - 10.6g","description":"\u003cp\u003eDualsky presents the T8F servo, a quality option for those wanting a full metal, high voltage wing servo with all the speed, power and robustness of more expensive servos, but don't want to break the bank.\u003c\/p\u003e\n\u003cp\u003eA programmable digital circuit (via the Dualsky USB LINK MP Tool) and a quality potentiometer are the brains of the operation and the brawn is an ultra responsive coreless motor, which drives a strong, ultra low low backlash steel gear train. The output spline is supported at each end by quality ball bearings, all in a CNC machined Aluminum case for superb heat dissipation. \u003c\/p\u003e\n\u003cp\u003e The T8F also features a wide voltage range from 3.8v to 8.4v, for use with single or two cell LiPo power, or anything in between. Its 8mm thickness lets it fit into many thin servo pockets making them a great choice for F3K, F5K, eRES, F5J Lite, F5J or anywhere else you need a robust, lightweight, fast, powerful and affordable high voltage servo.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage Range: 3.8V-8.4V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTorque: 1.3 kgf.cm@3.8V, 2.0 kgf.cm@6.0V, 2.6 kgf.cm@7.4V, 3.0 kgf.cm@8.4V\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.16sec\/60°@3.8V, 0.12sec\/60°@6.0V, 0.09sec\/60°@7.4V,0.08sec\/60°@8.4V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorking Frequency: up to 333Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDeadband\/Resolution: 2µs (Programmable)\u003c\/li\u003e\n\u003cli\u003eDefault Travel Angle: ±50°=100° Total\u003c\/li\u003e\n\u003cli\u003eMax Travel Angle: 180°\u003c\/li\u003e\n\u003cli\u003eCase Material: Aluminum Alloy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor Type: Coreless DC Motor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGear Set Material: Hardened Steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePosition Sensor: Potentiometer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCase Dimensions: 23.5mm*8mm* 22.3mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6g with wire (150mm With JR Plug)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHorn Spline Φ3.9mm 15T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":46778886619273,"sku":"22375","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/T8F.jpg?v=1779402908"},{"product_id":"dualsky-t8p-servo-5-9kg-81-9-oz-in-0-08-sec-11-8g-copy","title":"Dualsky T8P Servo 5.9kg (81.9 oz in), 0.08 sec - 11.8g","description":"\u003cp\u003eDualsky presents the T8P servo, a quality option for those wanting a full metal, high voltage servo with all the speed, power and robustness of more expensive servos, but don't want to break the bank.\u003c\/p\u003e\n\u003cp\u003eA programmable digital circuit (via the Dualsky USB LINK MP Tool) and a quality potentiometer are the brains of the operation and the brawn is an oversize, ultra responsive coreless motor, which drives a strong, ultra low low backlash steel gear train for nearly 6kg of torque. The output spline is supported at each end by quality ball bearings, all in a CNC machined Aluminum case for superb heat dissipation. \u003c\/p\u003e\n\u003cp\u003e The T8P also features a wide voltage range from 3.8v to 8.4v, for use with single or two cell LiPo power, or anything in between. Its 8mm thickness lets it fit into many thin servo pockets making them a great choice for F3K, F5K, eRES, F5J Lite, F5J or anywhere else you need a robust, lightweight, fast, powerful and affordable high voltage servo.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage Range: 3.8V-8.4V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTorque: 3.0 kgf.cm@3.8V, 4.8 kgf.cm@6.0V, 5.6 kgf.cm@7.4V, 5.9 kgf.cm@8.4V\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.15sec\/60°@3.8V, 0.11sec\/60°@6.0V, 0.09sec\/60°@7.4V, 0.08sec\/60°@8.4V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorking Frequency: up to 333Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDeadband\/Resolution: 2µs (Programmable)\u003c\/li\u003e\n\u003cli\u003eDefault Travel Angle: ±50°=100° Total\u003c\/li\u003e\n\u003cli\u003eMax Travel Angle: 180°\u003c\/li\u003e\n\u003cli\u003eCase Material: Aluminum Alloy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor Type: Coreless DC Motor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGear Set Material: Hardened Steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePosition Sensor: Potentiometer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCase Dimensions: 23.5mm*8mm* 26.3mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 11.8g with wire (150mm With JR Plug)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHorn Spline Φ3.9mm 15T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aloft-01","offers":[{"title":"Default Title","offer_id":46787122462857,"sku":"22375P","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0570\/0186\/9449\/files\/T8P.jpg?v=1779403270"}],"url":"https:\/\/alofthobbies.com\/collections\/new-products.oembed?page=4","provider":"Aloft Hobbies","version":"1.0","type":"link"}