Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g

$11.20
/
Shipping calculated at checkout.
  • In stock, ready to ship
  • Inventory on the way

An inexpensive, high torque servo that can operate on both SBUS and PWM.

Corona presents the SB2038. This metal gear servo is has both good torque and speed. It can use both PWM as well as S-Bus signals and can be programmed using the Corona CSBP-1 SBUS Servo Programming card.

 

GEAR TYPE Metal
STALL TORQUE 4.0kg.cm ~ 4.6kg.cm
SPEED 0.15sec.60º/ 0.14sec.60º
DIMENSIONS 29 x 13 x 30mm (1.14" x 0.51" x 1.18")
WEIGHT 22g(0.77oz)
WIRE / PLUG LENGTH 215mm
OPERATING TEMPERATURE -20℃～+60℃
OPERATING VOLTAGE 4.8V | 6.0V
MODULE COMPATIBILITY Futaba S-Bus Receiver
POSITION SENSOR 3 wiper/ Indirect Drive
BEARINGS MR106
DEAD BAND ≤3uSec
SERVO TRAVEL 40º/one side pulse traveling 400us
OPERATING CURRENT 300mA | 400mA
SPECIAL FEATURES Programable
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g
Corona SB2038 Servo - 4.6kg (63.8 oz-in), 0.14 sec - 22g