Add an additional layer of safety to your Lipo charging system using our new, fused, 6s, parallel charging boards. Each of the batteries power leads is protected by a 40 amp blade fuse and the balance circuits are protected by 28, 185L solid state fuses.
If you need to charge more than 4 batteries at a time, you can daisy chain two ParaBoards together but be mindful not exceed the 35 amp max charge rating or you may start blowing fuses.
The ParaBoards are constructed using 1.5mm fiberglass pc boards with 2oz copper traces. The main bus bar has been built up with solder to increase it's current handling, resulting in a 25amp continuous current output and a maximum current output of 35 amps for a period of 10 to 15 minutes. The injection molded cases are made from a special, fire resistant ABS plastic.
If you have never parallel charged before, we recommend doing a Google search on the subject so you can learn the do's and don'ts of parallel charging. Your batteries can burst into flames if you do not do this properly.