You have no items in your shopping cart.

Product was successfully added to your shopping cart.
FrSky C2110 SBUS servo

FrSky C2110 SBUS servo


(In stock)

FrSky C2110 SBUS servo

Be the first to review this product

Quick Overview

logo Less wiring. Less weight. Less mess :)


Availability: In stock


Utilizing the SBUS system in your aircraft can help you reduce the amount of wiring in your model and even save you a little bit of weight to boot. Imagine a full house glider wing with six servos that only needs a 3 pin(+ - /signal) electrical connection per wing. Pretty neat right. That is the advantage of SBUS servos. It works like this. Each of the servos are connected to same signal wire which is in turn connected to the SBUS output on the receiver. That signal wire contains all the information needed to control every servo in the plane. The servos then read the SBUS line and respond only to the signals that have been addressed specifically to them.

The servo construction is very good, machined aluminium cases, metal gears, ball bearing outputs, coreless motors and of course they are digital. However they can also be used as a standard servo utilizing PWM / PPM


  • You will need a channel changer to set the servo to the desired channel, once set, that servo will respond to only that channel. 
  •  CPPM mode is not currently an option as a new channel changer from FrSky will be required for this feature.


Additional Information

Servo Type Digital
Gear Type Metal
Stall Torque 1.50kg.cm@4.8V,2.00kg.cm@6.0V,2.50kg.cm@7.4V
Speed 0.09sec/60°@4.8V,0.08sec/60°@6.0V,0.07sec/60°@7.4V
Voltage Rating 4.0v ~ 7.4v
Dimensions 23.5 x 8 x 20mm (.925 x .315 x .787)
Weight 9g (.317oz)
  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register