TFR8S replaces the TFR8. The 8S can work with the transmitters failsafe. Of couse you can still program the failsafe into the reciever if you prefer.
FASST 2.4G Air Systems (7CH Mode/Multi Mode): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc.
Number of channel: 8
Operating Voltage Range: 3.5V~10V
Operating Temperature Range: -10℃~60℃
Operating Current: 100mA
Latency: 14ms (FS)
TFR8-S can parallel with TFR8/TFR8-S to become a multi-channel FASST compatible receiver. Follow the steps below:
1) Bind both receivers to the transmitter/transmitter module first;
2) Connect CH1 & CH2 of TFR8-S by a jumper, then CH3 will be shifted to CH9, CH4 will be shifted to CH10, and so forth;
3) The two receivers can be placed in different parts of the model.
Please note that there are many differences between other brand and FrSky, especially in the binding procedure and failsafe setting. Read the instruction manual carefully and set up devices as described below.
Not sure why this time .. but both these receivers caused my Futaba S3305 Servos to "Buzz" constantly... I tried these same servos with a Futaba Brand Receiver.. and no Buzz.. Not sure why I have used FrSky on other planes.... GREAT Service though Aloft refunded my money.. Thanks !
Bought two of these units for my Ziroli B25....much more economical than the Futaba counterpart....they linked together very easy and work SMOOOOTH using 12 of the 14 channels available! Binding process was easy!
Frsky is MY RECIEVER of CHOICE NOW!