- New Items
|Stall Torque||3 Kg/cm at 4.8V / 3.5 Kg/cm at 6V|
|Speed||0.14 sec / 60 degree at 4.8V / 0.12 sec / 60 degree at 6V|
|Voltage Rating||4.8V - 6.0V|
|Dimensions||31mm X 16.3mm X 29.5mm|
I bought these for separate aileron servos in a 40 size plane. The original servos were the same torque specs so I thought they would be a good fit. I noticed that after 2 flights, the servos became sloppy loose. As I wiggle the control surface up and down, I can see the splined shaft moving up and down and side to side. The rest of the linkage is tight, just the servo splined shaft wiggles. I think I will have to go back to a good old fashion full size servo. These servos may work ok in a foam park flyer, but then why go metal gear for that application.