RTGModel Rotmilan

$1,464.10

Availability: Out of stock

We are excited to introduce the Rotmilan.

  • DESCRIPTION
  • The Rotmilan is an F3F/F3B competition level plane created by RTGModel. The craftsmanship of the Rotmilan is gorgeous and the design is well thought out and exemplifies solid engineering. Much of the kits detail work has already been taken care of, for instance, the tow hook, ballast tube, V-Tail control horns. A very nice molded servo tray and even the metal wire tabs that hold the canopy on, have all been pre-installed, allowing the builder to focus on the all important task of control system installation and setup.

    The Rotmilan's fuselage is molded using the bladder method and is comprised mostly of carbon fiber with the exception of the nose which is fabricated from 2.4Ghz friendly kevlar. The 3 meter wings sport Norbert Habe airfoils and are constructed using a double spread tow carbon fiber layup. The control surfaces are connected to the servos through a very cleverly designed "roll drive" that provides a very solid link between the control surface and the servo.  Both the wings and the V-Tails come with wing bags and the fuselage comes loaded with 895 grams of stainless steel ballast slugs.

    Note: While The Rotmilans that we have purchased are made from spread tow carbon the carbon is not exposed as is shown in the galleries we have linked to below. Instead the areas that used to reveal the spread tow are painted black during the molding process.

    As I have just touched upon the salient points of the Rotmilan I will leave you, my fellow pilot, with some links that you can use to gather more information and understanding on the benefits of this aircraft.

    Rotmilan F3F flight photos

    Photos of all the parts included in the kit

    Roll drive assembly PDF

    Control surface settings video

    Airfoil HN Modified
    Wingspan 3018mm (106.5in)
    RTF Weight 2150 - 3650g / 4600g (75.8 -128.7oz) /162.3oz
    Fuselage Length 1491mm (58.7in)