TopModel Flip 2m Aerobatics Ship

4 1
Bungee launch it. Slope it. Electrify it. Tow it.

Only 2 left in total. Click to see additional information.

Product Name QTY Remaining
White Red 2
  • The Flip is a strong aerobat. It's fish shaped fuselage supports it well in a knife edge and through rolling circles. Precision aerobatics are clean and sharp. At the other end of the spectrum, the Flip is gentle enough to be lazed around the sky and we've even heard rumors of it catching a thermal or two. The Flip can be setup to be bungee launched, sloped or electrified for self launch goodness. 

    The fuselage is molded from fiberglass with carbon reinforcements in the critical stress areas. The tail boom area is a "glass foam glass" sandwich which results in a lightweight yet stiff structure. The wing joiner holes are pre drilled and the joiner tubes are epoxied into place. The Flips fuselage is quite roomy making it a joy to work on, even when installing an electric drive.

    Wing construction is balsa over polystyrene cores, complete with glass reinforced spars and finished in Oracover. The full flying elevator is constructed primarily of balsa with a carbon spar and leading edge. The rudder is a balsa built up affair finished in Oracover.

    Upon opening the box containing the Flip, you will notice TopModels' very good craftsmanship and build quality. All of the parts are individually wrapped or bagged; airframe parts, screws, control linkages to the firewall.. The kit is beautifully packed and very complete! 

    If you would like to peruse the build instructions click here.

    Kit Contents:

    • Lightweight fiberglass fuselage molded in a white epoxy gel coat with removable canopy
    • Lightweight foam cored balsa sheeted wings finished with Oracover®
    • Tailplanes are constructed of balsa and carbon and then covered with Oracover®
    • Top quality components for finishing the kit
    • Vinyl CNC cut decals
    • Complete assembly manual with step by step illustrations
    Length 1350mm (53.15in)
    Airfoil HQ
    Wingspan 1999mm (78.7in)
    Wing Area 40.2 dm2 (4.3sqft)
    RTF Weight 1.8kg ~ 2.1kg (63.4 – 74oz)
    Controls Aileron, Elevator, Rudder, Throttle
    Construction Foam / Wood Wing, Fiberglass Fuselage
    Tail Type Full Flying Elevator
    Recommended Setup
    • Motor: Mega ACn 22/30/3E or equivalent
    • ESC: 60-80 amp 
    • Prop: 14 x 8
    • Wing servos: 2 X KST DS135MG
    • Rudd, Elev, servos: KST 215 or equivalent
    • Battery: 2000mAh - 4000mAh 3s 
    • 40mm spinner / 5mm collet