XPower XC 3522 / 5 LS

A new long shaft motor design from TopModel.

Only 1 left

  • XPower XC 3522 / 5 LS

    Have you ever run into the problem that your chosen outrunners diameter is too big to fit into the nose of your sailplane; or would you like to power your sailplane without cutting the nose off the fuselage?

    Maybe this will help.

    Basically, what we have here is a outrunner with a very long shaft and a machined aluminum bearing housing that bolts to the base of the outrunner. The bearing housing contains 2 ball bearings on the output end, bringing the bearing total to 5 ball bearings supporting the motor shaft (see exploded veiw on the pics above).


    • Recommended number of cells: 2-3s LiPo
    • KV: 1000
    • Max current: 50A
    • Internal resistance: 18.5mOhm
    • Dimensions: Ø35x48 
    • Shaft Diameter: 5mm
    • Weight: 165g
      Whats in the box:
    • Long Shaft Motor
    • Mounting Hardware (cap screws, washers, T-nuts)
    • Female Bullet Connectors
    • 2 Allen Wrenches
    • Prop Nut and Collet
    • Bolt on Prop Mount (See pics above)