Six Port - Parallel Charge Board for XT60 Batteries

Save time by simultaneously charging your Lipo batteries in parallel.

I generally fly through four batteries a day. I used to charge my batteries one at a time and this usually took around 3 hours to charge all four of them. After I learned about parallel charging my charging time was reduced to 45 minutes!

If you need to charge more than 6 batteries at a time, you can daisy chain two ParaBoards together but be mindful not exceed the 35 amp max charge rating or you may blow the fuse.

The ParaBoards are constructed from 1.5mm fiberglass pc boards with 2oz copper traces. The main bus bar has been built up with solder to increase its current handling, resulting in a 25amp continuous current output and a maximum current output of 35 amps for a period of 10 to 15 minutes. The injection molded cases are made from a special, fire resistant ABS plastic.

If you have never parallel charged before, we recommend doing a Google search on the subject so you can learn the do's and don'ts of parallel charging. Your batteries can burst into flames if you do not do this properly.

Featured Specifications:

• Six Port: Charge six batteries simultaneously (XT60)
• Fuses: One 40amp Automotive blade fuse. 
• Max Current: 25 amps continuous (35amps for 10-15 minutes)
• Silicone Insulated Wires: XT60 with 12awg for main bus and 22awg for balance lines.
• Max Voltage: 22.2 Volts 
• Color: Blue
• Constructed from fire resistant ABS
• Connects to the charger via Male XT60