ZTW Gecko 150A ESC OPTO HV 6-12s
- In stock, ready to ship
- Inventory on the way
High Quality, High Power ESC's manufactured by ZTW
Reliability and high performance are the name of the game for the Gecko Series of speed controllers. Thanks to ZTW's "Sync Rectifier Drive" these ESC's deliver a quick but very linear throttle response.
Manufactured using quality components and encased in a generously sized rectangular heat sink, the Geckos are designed and built with the serious modeler in mind.
The ESC has a thermal protection system that lowers power output if the ESC temperature should exceed 110°C Once the ESC temperature returns to 100°C or below, full power is once again resumed. This alerts the pilot that there is a problem and to land. The Gecko also has a built in memory that records Highest Temperature and Highest RPM of the flight. This information can viewed using ZTW's LCD Programmer or wifi module.
Gecko ESC's are fully programmable using the LCD Programmer. The firmware is upgradable using the LCD Programmer's USB connection and ZTW's Firmware / Programming App downloaded from ZTW's website. See the tables below for more information on programming parameters.
| Model | Gecko 150A OPTO HV | |
| Type | Brushed / Brushless | Brushless |
| High Voltage / Standard Voltage | High Voltage | |
| Specifications | Continuous Current | 150A |
| Burst Current | 180A | |
| Cell Count | 6 - 12s Lipo | |
| BEC Output | na | |
| Dimensions | Length / Width / Height | 65 / 46 / 17mm |
| Weight | 123 grams | |
| Wire and Connectors | Power Wires | 10AWG 160mm Both red and Black |
| Motor Wires | 10AWG 160mm Black | |
| Signal Wires | 330mm with JR Plug | |
| Signal Wires 2 | 150mm with JR Plug | |
| Power Plug | na | |
| ESC Programming - Via | Transmitter | Yes |
| LED Programming Card | no | |
| Wifi Module | Yes | |
| LCD Programming Card | Yes | |
| Firmware | Upgradable | Yes |
| Programmable Features |
No. of ESC "Beeps" |
Short Beep | 2 Short Beeps | 3 Short Beeps | 4 Short Beeps | 1 Long Beep | 1 Long Beep 1Short Beep |
1 Long Beep 2 Short Beeps |
1 Long Beep 3 Short Beeps |
1 Long Beep 4 Short Beeps |
| Features | ||||||||||
| Brake Type | Brake Off | Soft Brake | Mid Brake | Hard Brake | ||||||
| Battery Type | NiCD NiMH |
LiPo | LiFe | |||||||
| Cut Off Voltage | Threshold | 2.8V / 50% | 3.0V / 60% | 3.2V / 65% | No Protection | |||||
| Restore Factory | Defaults | Restore | ||||||||
| Motor Timing | Auto | 2° | 8° | 15° | 22° | 30° | ||||
| SBEC Voltage | na | |||||||||
| Governor Mode |
RPM OFF | Soft Start 1 | Soft Start 2 | Governor Mode 1 | Governor Mode 2 | |||||
| Motor Rotation | Forward | Reverse | ||||||||
| Start Up Velocity | 10% | 15% | 20% | 25% | 30% | 35% | 40% | 45% | 50% | |
| Low Voltage | Cut Off Type | Reduce Power | Cut Off Power |
| Factory Default Settings | |
| Brake Type | Brake Off |
| Battery Type | LiPo Auto Detection |
| No. of Cells | Auto Detection |
| Cut Off Voltage Threshold | 3.0V / 60% |
| Motor Timing | Auto |
| SBEC Voltage Output | 5.0V |
| Governor Mode | Off |
| Motor Rotation | CCW |
| Start Up Velocity | 30% |
| Low Voltage Cut Off Behavior | Reduce Power |
