Performance
While others are using converted DLG wings, the Fury is designed from the ground up based on the current F5K rules. Due to the wing loading requirements, we believe F5K models will require larger wing areas coupled with higher lift airfoils. With that in mind, the Fury’s aero is based on the BAMF with Synergy 2 airfoils but scaled up in wing area and with the airfoils redistributed. As a result, the Fury will still be able to fly ‘light’ even when flown at higher wing loadings.
The Fury uses four servos installed in the belly of the fuselage, screwed down in a servo tray. Ample room in the nose allows for more gear selection based on your preference. QuikLink pushrods keep flaperons nice and tight, while the tails actuate with pull-spring like DLGs.
Sample install. Servos not included.
Construction
For ease of transportation, the wing is removable and splits down the center. Both the fin and stabilizer are also removable, helping the Fury minimize the storage and transport footprint. The Fury is made in Ukraine along with our BAMF and Deviant models. Needless to say, the quality is top-notch with a precise fit and shiny finish. All parts are produced in CNC milled aluminum moulds, and all flying surfaces have a solid Cascell core for an incredible strength-to-weight ratio. The fuselage is carbon but has a fibreglass nose for compatibility with your radio receiver.
Structure:
Solid Cascell molded wing and tails
Light: CW30 skin
Standard: CW40 skin
Strong: Co-axial CW60 skin
Tails: CW20 skin
1-piece fuslage
2-piece wing (centre split)
Canopy
Flight Characteristics:
Friendly handling
Very easy to fly
Forgiving to pilot errors, such as flying too slowly or with too much camber
All-round model, optimized for working low and light thermals
Specifications:
Wingspan: 1490mm
Wing area: 21.66 dm²
Wing airfoil: modified Synergy 2
Horizontal tail area: 2.43 dm²
Light AUW: ~265 grams
Standard AUW: ~275 grams
Strong AUW: ~285 grams
Min F5K wing loading (12dm²): 289 grams
Recommended Gear:
Servos (standard build): 4* KST X08 v6, A08 v6
Servos (light build): 4* KST X06
Battery: 2S LiPo 520 mAh
Motor: 1507 Powertrain, 1806 Powertrain
Spinner: 25mm
Propellor: to match motor
ESC: 20A
CN Models spinner and blades shown - Not included.
Basic Setup
These are the basic settings that will be a good starting point for setting up your Fury to your preferences. There are pilots flying the CG from 65-73mm, some report a slightly forward CG at 68mm for most conditions.
CG: 68mm
Camber
Speed: 1mm reflex
Cruise: 3mm down
Thermal 1: 6mm down
Thermal 2: 10mm down
Snap Flaps: ~5mm at full elevator deflection
Build Manual HERE.