The Magic 3 is the latest design of the Magic line from by Salahi Tezel. This is a true, state of the art, competition FAI F3L/F5L ship that is placing very well in competitions around the globe. We are very pleased to offer you prebuilt airframes for this wonderful model.
Salahi has done a wonderful job on the design, there are so many features that we really love. Magic 3 is the latest generation, a fantastic model based on the experience gained from the previously produced Magic, Magic Pro, and Magic 2 versions, as well as feedback received from Magic pilots.
The pre-built models are very impressive. The finished weights are right around 250 grams without your radio gear. The horizontal tail and wing unbolt, and the wing is a 3 piece unit that makes travel much easier. Magic 3 has been produced in several versions: Super Light, Magic 3 Allround, and Magic 3 Elektro. The
wings, elevators, and rudders of all versions are compatible with each other.
Due to its construction technique, Magic 3 has a very sturdy structure. Its light weight allows you to sense thermals better. Compared to previous versions, the narrower wing structure and some changes made in the airfoil enable the model to travel farther and easily return to the starting point.

Thanks to the model's characteristic structure, thermal turns are very easy, preventing mistakes. The dual spoilers make it easier to land the model at the desired point. There is a ballast compartment in the fuselage, and adding or removing the weights is quite simple.
Wing Span:2mt
Wing Area:31.90 dm2
Length:122.5
Flying Weight:300/440gr (depending on version and gear)
Wing Loading:9.4/dm2
Airfoil:Ag -Modified
Control:Elevator/Rudder/spoilers
Centre of Gravity:69/75mm
You can set the Center of Gravity (CG) at 73 mm. Set the rudder throw to 2.5 cm in both directions, and the elevator to 9 mm up / 8 mm down. For thermal mode, use 3 clicks of up trim, and for speed mode, 4 clicks of down trim (note: "clicks" will vary greatly based on radio setup.)
F5L Manual: click here
Images for linkage setups:




