Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g

$9.00
/
Shipping calculated at checkout.
  • In stock, ready to ship
  • Inventory on the way

The Corona SB9029 S-BUS Servo. 

Corona presents the SB9029. This servo can use both PWM and S-Bus signals. It features a metal gear train and has good speed and torque. It can be programmed using the Corona CSBP-1 SBUS Servo Programming card.

SERVO TYPE Digital
GEAR TYPE Metal
STALL TORQUE 2.0Kg.cm (27.77 oz-in)@4.8v | 2.2Kg.cm (30.55 oz-in)@6v
SPEED 0.12/60°@4.8v | 0.10/60°@6v
DIMENSIONS 22.5 x 11.5 x 24.6mm (0.88x0.45x0.96in)
WEIGHT 12.5g (0.44oz)
WIRE / PLUG LENGTH 215mm
OPERATING TEMPERATURE -20℃～+60℃
OPERATING VOLTAGE 4.8V | 6.0V
POSITION SENSOR Dual Wiper / Direct Drive
SERVO COMPATIBILITY Futaba S-Bus Receiver
BEARINGS MR85
DEAD BAND ≤3uSec
SERVO TRAVEL 40º/one side pulse traveling 400us
OPERATING CURRENT 200mA ~ 240mA
SPECIAL FEATURES Programmable
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g
Corona SB9029 Servo - 2.2 kg (30.55 oz-in), 0.10 sec - 12.5g