The Kite is a well rounded DLG that fits between the higher performance BAMF and the more forgiving Fury. Not sure which of the three, then the Kite hits that sweet spot in the middle.

The build quality of these airframes are extremely high, I dare say the best we have seen. They are light and strong and the design considerations are all top notch.

The Kite is a very attractive 1.5m all molded F3K glider from Ukraine. The Kite uses the well regarded Zone V2 wing and tail design, ensuring excellent mid and high speed performance and the good soaring characteristics of the discus launched glider.
Developed specially for F3K competitions, and ease of operation. Changing ballast will take only a few seconds, there are no screws or rods for fixing. Just pull off the nose cone and lift the ballast clamp with one finger. Then slide new ballast into the slot and it will drop into place. Video of ballast swapping:
Slim design with big enough wing area provides good wind penetration with a good lift-to-drag ratio, so you don’t need to use heavy ballast in windy weather.
- More advantages of Kite DLG:
- Fast reballasting system
- 2 or 4 servos in pod
- Ultra High Modulus materials
- Cascell cores
- Comfortable asymmetrical t-peg

The spread carbon over Cascell core wing is very nicely made, with a high gloss finish and attractive colour schemes. A very good detail is that the aileron servos are mounted in the wing, giving extra space in the fuselage and simplifying the aileron linkage. Low drag servo covers perfectly cover the servo openings.
Mounting the aileron servos in the wing makes for a nicer install.

If mounting aileron servos in the nose, smaller servos work best.

The Kite is supplied with a complete accessory pack including 3D printed servo tray (designed for KST X08H servos), control horns, pull-cable, torque springs, pushrods and wing mounting screws.
Ballast and wing bags available separately.
Build guide can be found here.
Manufacturer Recommended Components:
- Battery 1S 300-500 mAh
- Servos KST (2) X-08N for ailerons, (2) X06N for tail. (or similar high quality 8 and 6mm servos)

Kite 1.5m two-piece wing specifications:
- Wing airfoil: Zone-V2
- Wing area: 20 dm2
- Stabilizer airfoil: FreakV2
- Stabilizer area: 2.15 dm2
- Fin airfoil: HT-23
- Fin area: 1.95 dm2
- Empty Weight: 170 g
- Flight Weight: 220 g on the low side.